Table of Contents
Advertisement
LIST OF KEY OPERATOR PROGRAMS
Category
Program Name
Timer setting
Auto Power Off
Auto Clear
Preheat Mode
Time Out Setting
Enable/disable
Disable Auto Paper
Selection
Disable Auto Tray
Switching
Disable Job Program
Changing
Disable SPF/RSPF
Disable 2-Sided Copy
Disable Stapler
Disable Centre Tray
Counting
Disable Auto Power
Shut-off
Disable Beep at Key
Touch
Disable Backlight
Change
124
Function
Sets a time interval after which the copier enters
the auto power shut-off mode.
Sets a time interval after which the copier returns
to the initial settings.
Sets the time that elapses before the copier
enters the preheat mode after copying is
completed.
Sets the time after which a print or fax job
resumes. (This program can be used only if an
optional dual function board or an optional
facsimile expansion kit is installed.)
Prevents automatic paper selection.
Prevents automatic switching between the paper
trays.
Prevents stored programs from being replaced
or deleted.
Prevents the use of an SPF or RSPF when it
malfunctions. (This program can be used only if
an optional SPF or RSPF is installed.)
Temporarily prevents the duplex system from
operating when it malfunctions. Allows the use of
the copier but not the duplex system.
Prevents damage to the stapler while awaiting
repair service. (The stapler is included in an
optional finisher and this program can be used
only if the finisher is installed.)
Disables count of paper output into the copier
centre tray.
Disables the auto power shut-off mode.
Enables or disables sounding of beep when keys
are touched.
Disables change of the display colour.
Page
No.
132
132
133
133
134
134
134
135
135
135
135
136
136
136
Advertisement
Table of Contents
