Specifications; Acceptable Originals; Unacceptable Originals - Sharp AR-215 Operation Manual

Digital laser copier/printer
Hide thumbs Also See for AR-215:
Table of Contents

Advertisement

SINGLE PASS FEEDER (AR-SP4N)/REVERSING SINGLE PASS FEEDER (AR-RP3N)

Specifications

Acceptable originals Weight
Size
Capacity
Power supply
Drawn from the copier
Detectable original
A5, A4, A4R, B4, A3 (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14",
sizes
11" x 17")
Weight
SPF
RSPF
Dimensions
583 mm (W) x 435 mm (D) x 133 mm (H)
(22-61/64" (W) x 17-1/8" (D) x 5-1/4" (H))
NOTE:
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units and there may be some
deviations from these values in individual units.

Acceptable originals

Originals ranging from A5 to A3 (5-1/2" x 8-1/2" to 11" x 17") and from 56 to 90 g/m
can be used. Up to 40 originals can be set but the total aggregate thickness must not exceed 4 mm
(5/32"). For B4 (8-1/2" x 13") and larger sizes, up to 30 originals can be set.
NOTES:
q
Be sure to remove any staples or paper clips from the originals.
q
Before placing curled or wavy originals into the document feeder tray, be sure to flatten them. If
not, original misfeeds may result.
q
For best feeding of originals which have binding holes punched into them, insert them so that
the holes are positioned to the right or along the original guides. In this case the settings for
margin shift may need to be changed. See page 60.

Unacceptable originals

The following types of paper cannot be used as originals:
q
Special papers including transparency film, photographs, and tracing paper
q
Damaged or crumpled originals
q
Paper with multiple punched holes (paper with two or three holes can be used)
q
5-1/2" x 8-1/2" size originals cannot be used in the 2-sided to 1-sided or 2-sided to 2-sided mode.
96
56 to 90 g/m
(15 to 23 lbs.)
2
A5 to A3 (5-1/2" x 8-1/2"* to 11" x 17")
* 5-1/2" x 8-1/2" size originals cannot be used in the 2-sided
copy mode.
Up to 40 sheets (the total thickness does not exceed 4 mm
(5/32"))
* For B4 and larger sizes (8-1/2" x 13" and larger sizes), up
to 30 sheets.
Approx. 5.0 kg (11.1 lbs.)
Approx. 5.4 kg (11.9 lbs.)
(15 lbs. to 23 lbs.)
2

Advertisement

Table of Contents
loading

Table of Contents