Table of Contents
Advertisement
Memory for Printer
This copier has a memory for storing data of scanned originals. If a dual function board is installed, part
of this memory will be used for storing print data. This program is used to set the percentage of the
memory used for the printer feature. The default setting is 50%.
When "MEM. FOR PRINTER" is selected and the OK key is pressed, the following display will appear.
q
This program can be used only if an optional dual function board is installed.
1.
Use the
and
2.
Press the OK key.
NOTE:
The memory capacity for storing original images and print data is 16 MB. The memory can be
extended to a maximum of 272 MB by adding commercially available memory modules.
Toner Save Mode
The toner save mode will reduce toner consumption by approximately 10% in the automatic, text, and
text/photo exposure modes. Copies will be lighter but still adequate for general use. Selection of this
mode has no effect on the photo mode.
To turn on the toner save mode, highlight "TONER SAVE MODE" and press
the OK key to display a check mark in the check box.
To turn off the toner save mode, select this program and press the OK key
again to clear the check mark in the check box.
MEM. FOR PRINTER
30%
40%
50%
60%
keys to select the desired percentage.
KEY OPERATOR PROGRAMS
8
131
Advertisement
Table of Contents
