Table of Contents
Advertisement
SINGLE PASS FEEDER (AR-SP4N)/REVERSING SINGLE PASS FEEDER (AR-RP3N)
Two-sided copies from two-sided originals
To copy in the two-sided to two-sided copy mode, an RSPF must be installed.
q
Paper sizes that can be used in the 2-sided copy mode are A5, B5, B5R, A4, and A4R (8-1/2" x 11"
and 8-1/2" x 11"R).
If a dual function board is installed, paper sizes that can be used are A5, B5, B5R, A4, A4R, B4, and
A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and 11" x 17").
1
Ensure that no original is left on the platen glass. Adjust the original
guides to the size of the originals and set the originals face up in the
document feeder tray.
q
5-1/2" x 8-1/2" size originals cannot be used.
2
Press the 2-SIDED COPY key.
q
The 2-sided copy mode selection screen will appear.
3
Use the
press the OK key.
q
Also the 2-SIDED COPY key can be used to select a 2-sided copy mode.
100
and
keys to select two-sided to two-sided copying and
COPY MODE
1 to 1
1 to 2
1
2
2 to 2
2
2
COPY MODE
1 to 1
1 to 2
1
2
2 to 2
2
2
Advertisement
Table of Contents
