Setting The Auto Iso Range - Pentax OPTIO VS20 Operating Manual

• In movie recording mode or the shooting mode is set to 9 (Green)
mode, only AUTO (sensitivity 100 - 800) is available.
• When set to c (Digital SR) mode, only AUTO (sensitivity 100 - 6400)
is available.
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.120).
Saving the sensitivity setting 1p.128

Setting the AUTO ISO Range

3
Set the sensitivity range when the sensitivity is set to AUTO.
You can select from 100-200, 100-400, 100-800, and 100-1600.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AUTO ISO
Range].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the sensitivity
adjustment range.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
When [Highlight Correction] in [D-Range Setting] is set to O (On), select
from 200-400, 200-800, and 200-1600.
110
Rec. Mode 1/4
Recorded Pixels
White Balance AWB
AF Setting
AWB
ISO100-200
Sensitivity
ISO100-400
AUTO ISO Range ISO100-800
EV Compensation
Auto 0.0
ISO100-1600
Cancel
MENU
OK
OK