Setting Auto Iso Range - Pentax Optio Optio WG-1 Operating Manual

• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944)/
• When set to c (Digital SR), 9 (Green), C (Movie), or
• When set to S (Fireworks) mode, the sensitivity is fixed at 80.
• When the shooting mode is set to
80-6400. Other sensitivities can also be selected.
Saving the Sensitivity setting 1p.158
3

Setting AUTO ISO Range

Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 80-100, 80-200, 80-400, 80-800, and 80-1600.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AUTO ISO
Range].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select the sensitivity
adjustment range.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
When the Sensitivity is set to 80 or 100 and Highlight Correction is set to
O (On), the setting changes to 160. The setting returns when Highlight
Correction is set to P (Off).
132
(Underwater Movie) mode, only [AUTO] is available.
(2592×1464).
(Report), the AUTO is fixed at
Rec. Mode
Sensitivity
AUTO ISO Range
EV Compensation
Movie
D-Range Setting
Pixel Track SR
MENU Cancel
2/4
AUTO
ISO80-100
ISO80-200
ISO80-400
ISO80-800
ISO80-1600
OK OK