Pentax OPTIO VS20 Operating Manual page 108

6
Press the 3 button.
The camera returns to capture status.
Refer to the section "To Set the White Balance Manually" for
instructions on adjusting the white balance manually.
Saving the White Balance setting 1p.128
To Set the White Balance Manually
Have a blank sheet of white paper or similar material ready.
3
1
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the [A Rec. Mode] menu reappears.
5
Press the 3 button.
The camera returns to capture status.
106
White Balance
Adjust
SHUTTER
Cancel Cancel Cancel
MENU
OK OK OK
OK