Using The Zoom - Pentax OPTIO VS20 Operating Manual

Using the Zoom

You can use the zoom to change the captured area.
3
1
Turn the zoom lever or the zoom lever for vertical
shooting in A mode.
x(Right)
Tele
w (Left)
Wide
When you continue to turn to the
right (x), the camera automatically
switches from optical zoom to Intelligent
Zoom and stops at the point where the
zoom switches to Digital Zoom.
Once the lever is released and turned
again, the camera switches to Digital Zoom.
* The focus range is not displayed when the focus mode is set to s,
or the shooting mode is set to S (Fireworks).
74
Enlarges the subject.
Widens the area that
is captured by the
camera.
Zoom lever
Four-way controller
4 button
Zoom lever for vertical
shooting
1.3 m- 1.3 m- 1.3 m-
Zoom ratio
Zoom bar
Focus range
(during zooming only)
38 38 38
130 x 130 x 130 x