Pentax OPTIO VS20 Operating Manual page 141

4
Use the four-way controller (23)
to select [Interval].
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23) to change the interval
and press the 4 button.
Choose from [3sec.], [5sec.], [10sec.], [20sec.], or [30sec.].
7
Use the four-way controller (23) to select [Screen
Effect].
After selecting [Screen Effect], press the four-way controller (5). A
pull-down menu appears with the following items. Use the four-way
controller (23) to select an item and press the 4 button.
Wipe The next image slides over the previous one from left to right.
Checker The next image appears in small square mosaic blocks.
Fade The current image gradually fades out and the next image fades in.
Off No effect
8
Use the four-way controller (23) to select [Sound
Effect].
9
Use the four-way controller (45) to select O (On) or P
(Off).
Except when the [Screen Effect] is set to [Off], you can choose O (On)
or P (Off) for the sound that is played when one image changes to the
next.
10
Use the four-way controller (23) to select [Start] and
press the 4 button.
The slideshow starts using the selected interval and effect.
Start
Interval Interval 3sec. 3sec.
Screen Effect Screen Effect Wipe Wipe
Sound Effect Sound Effect
MENU OK OK OK
4
139