Registering A Face To Be Detected Preferentially - Pentax OPTIO VS20 Operating Manual

3
Use the four-way controller (45)
to select O or P.
Corrects camera shake.
O
Does not correct camera shake.
P
4
Press the 3 button.
The camera returns to capture status.
One of the following icons appears on the display.
When the shutter release button is pressed halfway with [Shake
M
Reduction] set to O (On).
When [Shake Reduction] is set to P (Off). (If the camera shake is likely
l
to occur, f is indicated when the shutter button is pressed halfway.)
The Shake Reduction function does not work in the following situation:
- During movie recording

Registering a Face to be Detected Preferentially

You can register up to three faces to be detected preferentially in Face
Detection function (p.69). If the name is registered together with the face,
the name is displayed on the display when the face is detected. If
multiple faces have been registered and have priorities set, the face with
the highest priority is focused on when more than one registered face is
detected.
To Register the First Face
1
Press the MENU button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Face Recall].
Rec. Mode Rec. Mode 2/4
D-Range Setting
Shake Reduction
Face Recall
Face Detection On
Blink Detection
Digital Zoom
Exit
MENU
Rec. Mode
Rec. Mode 2/4
D-Range Setting
Shake Reduction
Face Recall
Face Detection On
Blink Detection
Digital Zoom
Exit
MENU
3
113