Pentax Optio Optio S10 Operating Manual

Pentax Optio Optio S10 Operating Manual

Pentax imaging operating manual digital camera optio s10
Table of Contents

Advertisement

Digital Camera
Operating Manual
To ensure the best performance from your
camera, please read the Operating Manual
before using the camera.

Advertisement

Table of Contents
loading

Summary of Contents for Pentax Optio Optio S10

  • Page 1 Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera.
  • Page 2 Regarding copyrights Images taken using the PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act.
  • Page 3: Using Your Camera Safely

    • If the camera emits smoke or a strange smell, or in the event of any other irregularity, stop using the camera immediately, remove the battery or disconnect the AC adapter and contact your nearest PENTAX service center. Continued use of the camera may result in fire or electric shock.
  • Page 4 • Do not disassemble or modify the product. This can cause a fire or electrical shock. • If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult a PENTAX Service Center. Continuing to use the product can cause a fire or electrical shock.
  • Page 5 • If water should happen to get inside the product, consult a PENTAX Service Center. Continuing to use the product can cause a fire or electrical shock. • If thunderstorm should be present during use of the battery charger or AC adapter, unplug the power cord and discontinue use.
  • Page 6: Care To Be Taken During Handling

    Care to be Taken During Handling • Take the Worldwide Service Network listing that is included in the package with you when traveling. This will be useful if you experience problems abroad. • When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or during travelling).
  • Page 7 To better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or the PENTAX website. Thank you for your cooperation. Refer to the PC Connection Manual (bottom right of front side) for more...
  • Page 8: Table Of Contents

    Contents Using your camera safely ... 1 Care to be Taken During Handling ... 4 Contents of the Operating Manual ... 9 Quick Lessons in Mastering the Camera... 10 Checking the Contents of the Package ... 12 Names of Parts... 13 Names of Operating Parts...
  • Page 9 Taking Pictures in the Basic Mode (Green Mode)... 59 Taking Pictures Automatically (Auto Picture Mode) ... 61 Setting the Functions (Program Mode)... 63 Selecting the Picture Mode According to the Shooting Scene (Picture Mode)... 64 Taking Pictures of Dark Scenes (Night Scene Mode) ... 74 Reducing Camera Shake and Blurring in Pictures (Digital SR Mode)...
  • Page 10 Deleting Selected Images and Sound Files (from Nine-Image Display) ... 134 Protecting Images, Movies and Sounds from Deletion (Protect)... 136 Viewing Images on AV Equipment ... 138 Playing Back an Image Using the Remote Control Unit (optional) ... 139 Setting the Printing Service (DPOF) ... 140 Printing Single Images ...
  • Page 11: Contents Of The Operating Manual

    Contents of the Operating Manual This operating manual contains the following chapters. 1 Getting Started ––––––––––––––––––––––––––––––––––––––––– This chapter explains what you need to do after purchasing the camera before you start taking pictures. Be sure to read it and follow the instructions. 2 Quick Start ––––––––––––––––––––––––––––––––––––––––––––...
  • Page 12: Quick Lessons In Mastering The Camera

    Quick Lessons in Mastering the Camera If you wish to master the camera soon after purchasing ... Go through all the basic operations from preparation, photo-taking and reviewing as shown below. (For the operating instructions, see the pages in parenthesis.) Check the package.
  • Page 13 Let’s use the menus. Set menu items. (p.44-45) Select the recorded pixels and quality level for still pictures. (p.92-94) Let’s use the Mode Palettes. Select icons on the Mode Palettes. (p.49-54) Let’s select a mode for capturing images. Auto Picture Mode (p.61) Picture modes (p.64-73) Let’s use shooting functions.
  • Page 14: Checking The Contents Of The Package

    USB cable. This section explains how to install the provided software “ACDSee for PENTAX” and the other necessary preparations for enjoying your digital camera pictures and movies on your computer.
  • Page 15: Names Of Parts

    Names of Parts Front Strap lug Battery/Card/ Terminal cover DC input terminal PC/AV terminal Back Shutter release button Power switch, Power indicator (green) Flash Remote control receiver Microphone Lens Self-timer lamp/Auxiliary AF light Access lamp Speaker LCD monitor Tripod socket...
  • Page 16: Names Of Operating Parts

    Names of Operating Parts Four-way controller In this operating manual, the four-way controller is described as shown below. MODE Button operation guide The button operation guide appears at the bottom of the LCD monitor during operation. The buttons are indicated as shown below. Four-way controller (2) Four-way controller (3) Four-way controller (4)
  • Page 17: Getting Started

    Getting Started Attaching the Strap Pass the narrow end of the strap through the strap lug and pass the other end through the loop.
  • Page 18: Powering The Camera

    Powering the Camera Installing the Battery Install the battery provided with the camera. Open the battery/card cover. Slide the battery/card cover in the direction open in the direction Insert the battery with the monitor while using the side of the battery to press the battery lock lever in the direction indicated by the arrow.
  • Page 19: Charging The Battery

    Connect the AC plug cord to the battery charger D-BC68. Plug the AC plug cord into the power outlet. Place the battery in the charger so that the PENTAX logo is visible. The charging indictor lights green while the battery is charging and turns off when charging is finished.
  • Page 20 The number of recordable images are based on CIPA standard measurement and may vary depending on capture mode and shooting conditions. Measured based on PENTAX standard and may vary depending on the condition of use. • In general, battery performance temporarily deteriorates as the temperature decreases.
  • Page 21: Charging The Battery Abroad

    Charging the Battery Abroad The battery charger supplied with the camera is designed to switch automatically to the voltage (100-240V) and frequency (50Hz, 60Hz) of the electricity supply in the country or region where used. However, electrical socket shapes differ depending on the country or region.
  • Page 22 Main Socket Types in the Major Countries and Regions of the World North America U.S.A., Canada Europe, Iceland, Ireland, Italy, Ukraine, Austria, Former Soviet Netherlands, Kazakhstan, Greece, Sweden, Union Denmark, Germany, Norway, Hungary, Finland, France, Belarus, Belgium, Rumania, Russia U.K. Spain Switzerland, Poland, Portugal Asia...
  • Page 23: Using Household Current

    Using household current We recommend using the AC adapter kit K-AC63 (optional) if you intend to use the LCD monitor for a long time or connect the camera to a PC. Make sure that the camera is turned off and open the terminal cover.
  • Page 24 Precautions When Using the Battery Charger or AC Adapter To avoid the risk of fire or electric shock when using the battery charger or AC adapter, be sure to read the section on “Using your camera safely” on page 1.
  • Page 25: Installing The Sd Memory Card

    Installing the SD Memory Card You can use an SD Memory Card with this camera. Images are recorded on the SD Memory Card or in the built-in memory of the camera. When shooting with an SD Memory Card installed ? appears in the upper right corner of the LCD monitor and the images are recorded on the card.
  • Page 26: Data Backup

    • Before purchasing an SD Memory Card, please check the PENTAX website to ensure that it is compatible with your camera. You can also contact the nearest PENTAX service center for this information.
  • Page 27: Image Size And Quality Of Still Pictures

    Image Size and Quality of Still Pictures Select the image size and quality best suited to your purpose. Higher quality levels and numbers of recorded pixels produce clearer images for printing, but the resulting increase in file size reduces the total number of pictures that can be taken.
  • Page 28: Size And Quality Of Movies

    512MB SD Memory Card. • The table above is based on standard shooting conditions specified by PENTAX and may vary depending on the subject, shooting conditions, capture mode, SD Memory Card, etc. Size and Quality of Movies Select the size and quality best suited to your purpose.
  • Page 29 • The table above indicates the approximate recording times when using a 512 MB SD Memory Card. • The table above is based on standard shooting conditions specified by PENTAX and may vary depending on the subject, shooting conditions, capture mode, SD Memory Card, etc. Best Better 28 min.
  • Page 30: Initial Settings (Setting The Display Language And The Date And Time)

    Initial Settings (Setting the Display Language and the Date and Time) In this operating manual, the four-way controller is described as shown below. MODE If the Initial Setting screen or Date Adjust screen appears when you turn the camera on, follow the procedure below to set the display language and/or current date and time.
  • Page 31: Setting The Display Language

    Setting the Display Language You can select the language in which the menus and error messages are displayed from the following: [English], [French], [German], [Spanish], [Portuguese], [Italian], [Dutch], [Danish], [Swedish], [Finnish], [Polish], [Czech], [Hungarian], [Turkish], [Russian], [Thai], [Korean], [Chinese (traditional and simplified)] and [Japanese]. Press the four-way controller (5).
  • Page 32 Press the four-way controller (5). The frame moves to [24h]. Use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display). Press the four-way controller (5). The frame returns to [Date Style]. Press the four-way controller (3). The frame moves to [Date].
  • Page 33 • You can cancel the settings for the Initial Setting by pressing the MENU button. If you take pictures without completing the Initial Setting, the Initial Setting screen will appear next time you turn on the camera. • You can change your settings for the Initial Setting later using the [H Set-up] menu.
  • Page 34: Quick Start

    The simplest procedure for taking still pictures is described below. The flash discharges automatically depending on the light conditions. Press the power switch. The camera turns on. Compose the picture on the LCD monitor. The camera AF will focus on the area within the focus frame.
  • Page 35 Pressing the shutter release button Press the shutter release button slowly in two steps. This allows for exact focusing as well as preventing camera shake. Basic way of shutter release Press the shutter release button halfway. Lightly press the shutter release button until you feel the click on your finger.
  • Page 36 Focus lock When you have difficulty in auto focusing on a subject, try the procedures below. You may have difficulty in auto focusing on such subjects as: • Subject contrast is very low. (a blue sky, solid white walls, etc.) •...
  • Page 37 Instant Review By default, the image is displayed on the LCD monitor for 0.5 seconds right after shooting (Instant Review). You can change the display time for the Instant Review. (1p.108) If you set it longer, you can delete the image while it is displayed on the LCD monitor.
  • Page 38: Playing Back Still Pictures

    Playing Back Still Pictures Playing Back an Image You can display the still picture you have just taken. Press the Q Playback button after taking a picture. The image appears on the LCD monitor. When you press and hold the OK/Display button for more than 1 second, the LCD Bright Mode is activated.
  • Page 39: Playing Back An Image

    Deleting the Displayed Image Press the Green/i button when playing back an image. The screen for deleting the image appears. Press the four-way controller (2) to select [Delete] and press the OK button. The image displayed on the LCD monitor is deleted.
  • Page 40: Common Operations

    Common Operations Turning the Camera On and Off Turning the Camera On in Capture Mode Press the power switch. The power indicator lights up in green. The lens extends and the camera turns on in the “Capture mode”. The camera is ready for taking pictures by pressing the shutter release button.
  • Page 41: Turning The Camera On In Playback Mode

    Turning the Camera On in Playback Mode Press the power switch while pressing the Q Playback button. The power indicator lights green and the camera turns on in the “Playback mode” with the lens retracted. To switch to the “Capture mode”, press the Q Playback button again. Playing Back Still Pictures p.36...
  • Page 42: Using The Button Functions

    Using the Button Functions Capture Mode w/x Zoom button Changes the size of the subject. (1p.32, p.85) Q Playback button Switches to the Playback mode. When pressed again, returns to Capture mode. (1p.36) Four-way controller (q5) Changes the focus mode. (1p.87) (g2) Changes the drive mode.
  • Page 43: Playback Mode

    Playback Mode w/x Zoom button Press w/f in single-image display to switch to nine-image display. Press x/y to return to the previous display. (1p.127) Press x/y to enlarge the image in single-image display. Press w/f to return to the previous display. (1p.123) Press w/f in nine-image display to switch to the calendar display.
  • Page 44: Menu Button

    For playing back voice recording files : Starts playback. When pressed again, pauses playback. ) : Selects a recorded file before playback. Performs the following operations during playback. Files with no recorded indexes: ) Rewinds five seconds. ) Advances five seconds. Files with recorded indexes: ) Starts playback from the previous index.
  • Page 45: Voice Recording Mode

    Voice Recording Mode Shutter release button When pressed, starts recording. When pressed again, stops recording. When pressed for more than one second, recording continues for as long as the button is held down and stops when the button is released. Q Playback button Switches to Playback mode.
  • Page 46: Setting The Menus

    Setting the Menus Press the MENU button to display the menu on the LCD monitor. There are two different menus, [A Rec.Mode] menu and [H Set-up] menu. How to Set the Menus The button operation guide appears at the bottom of the LCD monitor while you are making settings for the menus.
  • Page 47 To Save the Setting and Begin Playback of Images Press the Q Playback button. The setting is saved and the camera enters the “Playback mode”. To Save the Setting and Continue with Menu Operations Press the OK button or the four-way controller (4). The setting is saved and the screen returns to Step 3.
  • Page 48: Example Of Menu Operation

    Example of Menu Operation MENU button [A Rec.Mode] Menu Rec. Mode Recorded Pixels Quality Level White Balance AF Setting AE Metering Sensitivity AUTO 800 MENU Exit Rec. Mode Recorded Pixels Quality Level White Balance AF Setting AE Metering AUTO 800 Sensitivity Exit MENU...
  • Page 49: Menu List

    Menu List [A Rec.Mode] Menu Item Recorded Pixels For selecting the number of pixels Quality Level For selecting the image compression ratio White Balance For adjusting the color balance according to lighting Focusing Area For changing the area of the autofocus For limiting the focusing range of the lens in Focus Limiter accordance with the shooting conditions...
  • Page 50 [H Set-up] Menu Item Format For formatting the SD Memory Card or built-in memory For adjusting the operation sound volume and the playback Sound volume and setting the type and volume of start-up sound, shutter sound, key operation sound, self-timer sound. Date Adjust For adjusting the date, time, and display style World Time...
  • Page 51: Operating The Mode Palette

    Operating the Mode Palette Press the four-way controller (3) to display the Mode Palette on the LCD monitor. There are two different Mode Palettes, the “Capture Mode Palette” and the “Playback Mode Palette.” You can activate the Capture mode most appropriate for the shooting conditions or edit the taken images just by selecting the icons.
  • Page 52 Mode Palette List Capture Mode Palette Auto Picture Cancel MENU • Some functions may not be available or may not function fully depending on the shooting mode. For details, refer to “Available functions for each Capture mode” (1p.188). • When you select an icon on the Mode Palette, waiting for about 3 seconds, the description for the selected mode appears.
  • Page 53: O Voice Recording

    O Voice Recording Use this mode to record sound files. Be careful not to cover the microphone on the top of the camera with your hand. (p.118) q Landscape Use this mode for taking landscape views. The depth of field encompasses a wide area. (p.64) <...
  • Page 54 Sport Ideal for taking fast-moving action shots. The camera keeps the moving subject in focus until the shutter release button is pressed. (p.70) i Surf & Snow For capturing images with dazzling backgrounds, such as beaches or snowy mountains. (p.70) E Pet Ideal for taking pictures of pets.
  • Page 55: Frame Composite

    Y Frame Composite Use this mode to take pictures with a frame. The number of recorded pixels is fixed at h. (p.78) Face Recognition Face Recognition activates in b (Auto Picture mode), mode), z (Natural Skin Tone mode), C (Kids mode). This function recognizes faces, focuses, and performs exposure compensation when capturing images.
  • Page 56: Playback Mode Palette

    Playback Mode Palette Slideshow Cancel MENU Icon Item Slideshow Resize Cropping Image/ Sound Copy Image Rotation Color Filter Digital Filter Brightness & Filter Movie Edit Red-eye Compensation Voice Memo For adding a voice memo to an image Protect DPOF Start-up Screen Frame Composite...
  • Page 57: Taking Pictures

    Taking Pictures Taking Pictures Changing the Mode In the “Capture mode”, you can take pictures. In the “Playback mode”, you can play back or delete pictures. Switching between Capture Mode and Playback Mode To switch from the “Capture mode” to the “Playback mode” Press the Q Playback button.
  • Page 58: Histogram Display

    Histogram Display The brightness distribution of the image is displayed. The horizontal axis shows the brightness (darkest at the left end and brightest at the right end) and the vertical axis shows the number of pixels. 1 Recorded Pixels 3 White Balance 5 Sensitivity Grid Display The grids divide the screen into nine parts.
  • Page 59 • If you press and hold the OK/Display button for more than 1 second, the LCD Bright Mode is activated. The LCD monitor turns brighter for a certain amount of time. (1p.35) • Under shooting conditions where camera shake is likely to occur, (Anti-shake warning) will be displayed.
  • Page 60: Taking Pictures Using The Shake Reduction Function

    Taking Pictures Using the Shake Reduction Function “Camera shake” occurs when you jiggle your hands while taking pictures. “Blurring” is likely to occur when you take pictures of moving subject. This camera features image compensation systems and functions that work for both “camera shake”...
  • Page 61: Taking Pictures In The Basic Mode (Green Mode)

    Taking Pictures in the Basic Mode (Green Mode) In the Green Mode, you can enjoy easy picture taking just by pressing the shutter release button. Press the Green button in Capture mode. The camera enters the Green Mode. Press the Green button again to return to the previous status.
  • Page 62 You can assign other functions to the Green button. (1p.109) The list below shows the settings for the Green Mode. Flash mode The default is , (Auto). a (Flash Off) can be selected. Drive mode The default is P (Standard). g (Self-timer) can be selected. The default is = (Standard).
  • Page 63: Taking Pictures Automatically (Auto Picture Mode)

    Taking Pictures Automatically (Auto Picture Mode) In b (Auto Picture mode), the camera selects the most appropriate capture mode from - (Normal mode), A (Night Scene mode), q (Landscape mode) and release button. Press the four-way controller (3) in Capture mode. The Mode Palette appears.
  • Page 64 • In Auto Picture mode, the exposure is fixed to ±0.0. (1 • When the camera selects Portrait mode, “Face Recognition AF” and “Face Recognition AE” are activated. When you point the camera at your subject’s face, the camera automatically recognizes it, adjusting focus and exposure to take a high-quality picture.
  • Page 65: Setting The Functions (Program Mode)

    Setting the Functions (Program Mode) In R (Program mode), the camera automatically sets the shutter speed and aperture for taking still pictures. However, you can select other functions such as the Flash Mode or Continuous Shooting mode. Press the four-way controller (3) in Capture mode. The Mode Palette appears.
  • Page 66: Selecting The Picture Mode According To The Shooting Scene (Picture Mode)

    Selecting the Picture Mode According to the Shooting Scene (Picture Mode) You can select the Picture mode according to the shooting scene. There are 11 available modes in Picture mode. q Landscape < Flower Natural Skin Tone Portrait Half-length Portrait Kids Sport L Surf &...
  • Page 67 Use the four-way controller (2345) to select a desired mode. For example, select q (Landscape mode). Press the OK button. Press the shutter release button halfway. The focus frame on the LCD monitor will light green when the camera is in focus. Press the shutter release button fully.
  • Page 68 Taking Pictures of People (Natural Skin Tone Mode/Portrait Mode/Half-length Portrait Mode) In z (Natural Skin Tone mode), Portrait mode), “Face Recognition AF” and “Face Recognition AE” are activated. When you point the camera at your subject’s face, the camera automatically recognizes it, adjusting both focus and exposure. Natural Skin Tone Portrait...
  • Page 69 Press the four-way controller (23) to select (Portrait mode), z (Natural Skin Tone mode) or length Portrait mode). Press the OK button. The camera is ready for taking pictures in the selected mode. When the camera recognizes the subject’s face, a yellow focus frame appears on it. The position and the size of the frame change while the camera continues to adjust the focus on the moving subject.
  • Page 70 Taking Pictures of Kids (Kids Mode) C (Kids mode) is ideal for taking pictures of moving children. Also gives them a healthy look. “Face Recognition AF” and “Face Recognition AE” are activated. When you point the camera at your subject’s face, the camera automatically recognizes it, adjusting both focus and exposure.
  • Page 71 • Only the selected mode icon and the focus frame appear on the LCD monitor. No other shooting information is displayed. You cannot change the display mode by pressing the OK/Display button. • “Face Recognition AF” and “Face Recognition AE” may not work if the subject’s face is partly covered, for example, with sunglasses, or when the subject does not face the camera.
  • Page 72 Taking Pictures of Sports and Leisure Activities (Sport Mode/Surf & Snow Mode) Sport i Surf & Snow Press the four-way controller (3) in Capture mode. The Mode Palette appears. Use the four-way controller (2345) to select (Sport mode). When i (Surf & Snow mode) is previously selected, on the Mode Palette.
  • Page 73 Press the OK button. The camera is ready for taking pictures in the selected mode. Press the shutter release button halfway. The focus frame on the LCD monitor will light green when the camera is in focus. Press the shutter release button fully. The picture is taken.
  • Page 74 Taking Pictures of Your Pet (Pet Mode) In E (Pet mode), you can take pictures that show natural hair color of your pet. Select the appropriate icon depending on what color your pet is (closer to black or white or in between). Press the four-way controller (3) in Capture mode.
  • Page 75 Taking Pictures of Text (Text Mode) This mode allows you to take clear pictures of written text. This is convenient for capturing a digital copy of an important document or enhancing legibility of small print. Press the four-way controller (3) in Capture mode. The Mode Palette appears.
  • Page 76: Taking Pictures Of Dark Scenes (Night Scene Mode)

    Taking Pictures of Dark Scenes (Night Scene Mode) You can take pictures of dark scenes, such as nightscapes, with the appropriate settings. Press the four-way controller (3) in Capture mode. The Mode Palette appears. Use the four-way controller (2345) to select mode).
  • Page 77: Reducing Camera Shake And Blurring In Pictures (Digital Sr Mode)

    Reducing Camera Shake and Blurring in Pictures (Digital SR Mode) (Digital SR) mode allows you to set the sensitivity higher than other modes to reduce camera shake and blurring. Shutter speed and aperture are set automatically according to the sensitivity value you set. Use the mode under the shooting conditions that camera shake or blurring tend to occur.
  • Page 78: Taking Movies (Movie Mode)

    Taking Movies (Movie Mode) This mode enables you to take movies with sound. Press the four-way controller (3) in Capture mode. The Mode Palette appears. Use the four-way controller (2345) to select mode). Press the OK button. The following shooting information appears on the LCD monitor and the camera is ready for taking movies.
  • Page 79 Keeping the Shutter Release Button Pressed If you keep the shutter release button pressed for more than one second, the movie will be taken for as long as you keep the button pressed. Shooting stops when you take your finger off the shutter release button. •...
  • Page 80: Taking Pictures In Frame Composite Mode

    Taking Pictures in Frame Composite Mode You can take pictures with a decorative frame added using the Frame Composite function. There are three frames already stored in the camera. Press the four-way controller (3) in Capture mode. The Mode Palette appears. Use the four-way controller (2345) to select Y (Frame Composite).
  • Page 81 Press the shutter release button fully. The picture is taken. • The Recorded Pixels is fixed to 3M, and cannot be changed to any other size. • Continuous Shooting is not possible in Frame Composite mode. To Register a New Frame To switch to the screen for registering a frame, press the Green button in Step 3.
  • Page 82: Using The Self-Timer

    Using the Self-timer In self-timer mode, the picture is taken ten seconds or two seconds after the shutter release button is pressed. Press the four-way controller (2) in Capture mode. Press the four-way controller (45) to select g (Self-timer) or (2 sec.
  • Page 83: Continuous Shooting (Continuous Shooting Mode)

    Continuous Shooting (Continuous Shooting Mode) You can switch the Drive mode to [Continuous Shooting] mode. Pictures are taken continuously while the shutter release button is pressed. Press the four-way controller (2) in Capture mode. Press the four-way controller (45) to select j (Continuous Shooting).
  • Page 84 • You can continue shooting until the SD Memory Card or the built- in memory is full. • The interval will vary depending on the Recorded Pixels and Quality Level settings. • Under the following conditions, the continuous shooting interval becomes longer.
  • Page 85: Using The Remote Control Unit (Optional)

    Using the Remote Control Unit (optional) You can switch the Drive Mode to Remote Control mode to take pictures using the remote control unit E or F (optional). Taking Pictures Using the Remote Control Press the four-way controller (2) in Capture mode. Press the four-way controller (45) to select i (Remote control) or h(0 sec remote...
  • Page 86 Life of the Battery for the Remote Control Unit A signal can be sent from the remote control unit to the camera approximately 30,000 times. Contact your nearest PENTAX customer service center if the battery needs changing. (A charge is made for changing the battery.)
  • Page 87: Using Zoom To Change The Subject Size

    Using Zoom to Change the Subject Size The camera allows you to zoom in the subject at distance or zoom out to capture the expansive scenery. Press the zoom button in Capture mode. Zoom button (w) : Diminishes the subject Zoom button (x) : Enlarges the subject The zoom bar is displayed as follow.
  • Page 88: Setting The Digital Zoom

    Recorded pixels and zoom ratio Recorded Optical Zoom Range pixels 1× to 3× 1× to 3× 1× to 3× 1× to 3× 1× to 3× 1024 1× to 3× 1× to 3× • Intelligent Zoom is not available under the following conditions. - When Digital Zoom is set to Off.
  • Page 89: Setting The Shooting Functions

    Setting the Shooting Functions Selecting the Focus Mode Focus Mode Standard (Autofocus mode) Macro mode Super Macro mode Pan Focus mode Infinity mode Manual Focus mode Adjust the focus manually with the four-way controller. Saving the Focus Mode Four-way controller OK button The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway.
  • Page 90: Manual Focus

    Press the four-way controller (5) in Capture mode. Press the four-way controller (23) to select the focus mode. Press the OK button. The camera is ready for taking pictures in the selected focus mode. Auxiliary AF light • The auxiliary AF light may be activated under low lighting in Autofocus mode.
  • Page 91 After you determine the focus point, press the OK button to set the focus position and return to the normal capture screen. Press the four-way controller (5) to readjust the focus position. • When focusing, hold down the four-way controller (23) to focus quickly.
  • Page 92: Selecting The Flash Mode

    Selecting the Flash Mode Flash Mode Auto Flash Off Flash On Auto + Red-eye Flash On + Red-eye Soft Flash • The Flash Mode is fixed to Flash Off under the following conditions. - In Movie mode - In Continuous Shooting - When Focus Mode is set to Infinity mode •...
  • Page 93: In Capture Mode

    Press the four-way controller (4) in Capture mode. Use the four-way controller (23) to select the flash mode. Press the OK button. The camera is ready for taking pictures in the selected flash mode. Saving the Flash Mode • Using the flash in Macro mode may cause the image to be overexposed.
  • Page 94: Selecting The Recorded Pixels Of Still Pictures

    Selecting the Recorded Pixels of Still Pictures Select the number of the recorded pixels for still images according to how the images will be used. The larger the number of recorded pixels, the higher the quality of images, but the file size becomes larger. The selected Quality Level also affects the size of the image file (1p.94).
  • Page 95 Use the four-way controller (23) to change the recording pixels. The number of shots for the selected recording pixels appears. Press the shutter release button halfway. The camera is ready for taking pictures. • Selecting a large size produces a clear picture when it is printed out. •...
  • Page 96: Selecting The Quality Level Of Still Pictures

    Selecting the Quality Level of Still Pictures Select the quality (data compression ratio) for still images according to how the images will be used. The more ’s, the higher the quality of the image, but the file size becomes larger. The selected Recorded Pixels also affects the size of the image file (1p.92).
  • Page 97 Use the four-way controller (23) to change the quality level. The number of shots for the selected quality level appears. Press the shutter release button halfway. The camera is ready for taking pictures. The Quality Level setting is saved when the camera is turned off. Image Size and Quality of Still Pictures Rec.
  • Page 98: Adjusting The White Balance

    Adjusting the White Balance The light condition of the shooting location affects the overall color tone of pictures. Adjust the white balance to reproduce the natural color of the subject. White Balance Auto Daylight Shade Tungsten Light Fluorescent Light Manual Set another white balance if you are not satisfied with the color balance of pictures taken with white balance set to AWB (Auto).
  • Page 99 Press the shutter release button halfway. The camera is ready for taking pictures. Saving the White Balance Manual Setting Place a white material such as a piece of white paper in front of your camera to adjust white balance. Select (Manual) on the White Balance screen.
  • Page 100: Selecting The Autofocus Settings

    Selecting the Autofocus Settings You can set the autofocus area and focusing method. Press the MENU button in Capture mode. The [ARec. Mode] menu appears. Use the four-way controller (23) to select [AF Setting]. Press the four-way controller (5). The AF Setting screen appears. Changing the Focusing Area You can change the autofocus area (Focusing Area).
  • Page 101 Press the four-way controller (5). The pull-down menu appears. Use the four-way controller (23) to change the Focusing Area. Press the shutter release button halfway. The camera is ready for taking pictures. Saving the Focusing Area Setting Setting the Focus Limiter You can limit the focusing range of the lens in accordance with the shooting conditions.
  • Page 102 Setting the Auxiliary AF Light The auxiliary AF light is convenient when you shoot a dark subject. This helps you to focus on the subject under the conditions that the auto focus does not work properly. Use the four-way controller (23) to select [Aux.
  • Page 103: Setting The Light Metering Mode To Determine The Exposure

    Setting the Light Metering Mode to Determine the Exposure You can select which part of the screen to use to measure the brightness and determine the exposure. AE Metering Modes Multi-segment The exposure is determined by the entire screen. Center-weighted The exposure is determined mainly by the center of the screen. The exposure is determined by the small area in the center Spot of the screen only.
  • Page 104: Setting The Sensitivity

    Setting the Sensitivity Sensitivity (ISO sensitivity) is a value indicating how much the CCD senses light. Low value equals low sensitivity, and high value equals high sensitivity. Sensitivity can be adjusted according to the shooting situations. Sensitivity AUTO800 (64 - 800) is selected by default. (In Digital SR mode, AUTO1600 (64 - 1600) is selected by default.) AUTO You can also set ISO Correction in AUTO to 64 - 100, 64 - 200, 64 - 400,...
  • Page 105 Press the four-way controller (5). The pull-down menu appears. Use the four-way controller (23) to select the sensitivity. To show [1600] ([1600] and [3200] in Digital SR mode) on the pull-down menu, press the four-way controller (3) when [800] is highlighted.
  • Page 106: Setting The Exposure (Ev Compensation)

    Setting the Exposure (EV Compensation) The overall brightness of pictures can be changed by adjusting the EV compensation value (amount of light that the CCD receives). This changes the exposure automatically determined by the camera when you want to adjust the brightness of pictures to suite your taste. Press the MENU button in Capture mode.
  • Page 107: Selecting The Settings For Taking Movies

    Selecting the Settings for Taking Movies You can select the recorded pixels and quality level for taking movies. Press the MENU button in Capture mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Movie]. Press the four-way controller (5). The Movie setting menu appears.
  • Page 108 Press the four-way controller (5). The pull-down menu appears. Use the four-way controller (23) to select [Recorded Pixels]. The recordable time for the selected Recorded Pixels appears. Press the shutter release button halfway. The camera is ready for taking pictures. Selecting the Quality Level of Movies You can select the quality level from [C(Best)], [D(Better)] and [E(Good)].
  • Page 109 Compensating for Camera Shake While Taking Movies (Movie SR) When you set [Movie SR] to [O (On)], the movie-anti shake function is activated. It automatically compensates for image blur to allow you to take smooth movies. Use the four-way controller (23) to select [Movie SR].
  • Page 110: Setting The Instant Review Time

    Setting the Instant Review Time You can select the Instant Review time from [Off (no display)], [0.5 sec.], [1 sec.], [2 sec.], [3 sec.] and [5 sec.]. Press the MENU button in Capture mode. The [A Rec.Mode] menu appears. Use the four-way controller (23) to select [Instant Review].
  • Page 111: Setting The Green Button

    Setting the Green Button You can assign one of the following functions to the Green button; [Green Mode] (p.59) and [Fn Setting] (p.110). You can activate the assigned function by just pressing the Green button. Assigning a Function (Green Mode) Press the MENU button in Capture mode.
  • Page 112 Registering Frequently Used Functions (Fn Setting) You can register frequently used functions on the four-way controller. Using this function, you can directly set the functions by pressing the four-way controller without displaying the menu in Capture mode. In [Fn Setting], still picture mode and Movie mode have different settings. To execute [Fn Setting] for Movie mode, press MENU button in Movie mode in Step 1 on page 109.
  • Page 113 The initial settings for Fn Setting Initial settings (2) White Balance (3) EV Compensation (4) Recorded Pixels (5) Quality Level Functions that can be registered on Fn Setting Setting items Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity EV Compensation Sharpness...
  • Page 114: Setting The Image Sharpness

    Setting the Image Sharpness You can select whether you want the image to have sharp or soft outlines. Press the MENU button in Capture mode. The [A Rec.Mode] menu appears. Use the four-way controller (23) to select [Sharpness]. Use the four-way controller (45) to adjust sharpness.
  • Page 115: Setting The Color Saturation

    Setting the Color Saturation You can set the color saturation. Press the MENU button in Capture mode. The [A Rec.Mode] menu appears. Use the four-way controller (23) to select [Saturation]. Use the four-way controller (45) to adjust saturation. : Reduces the saturation. –...
  • Page 116: Setting The Image Contrast

    Setting the Image Contrast You can set the image contrast. Press the MENU button in Capture mode. The [A Rec.Mode] menu appears. Use the four-way controller (23) to select [Contrast]. Use the four-way controller (45) to adjust contrast. : Reduces the contrast. –...
  • Page 117: Setting The Date Imprint

    Setting the Date Imprint Set the date to be imprinted on your pictures. Press the MENU button in Capture mode. The [A Rec.Mode] menu appears. Use the four-way controller (23) to select [Date Imprint]. Use the four-way controller (45) to adjust [O (On)/P (Off)]. Press the shutter release button halfway.
  • Page 118: Saving The Settings

    Saving the Settings Saving the Menu Items (Memory) You can save the settings for the menus after turning off the camera (Memory function). Select [ On] to save the setting for the menu items after turning off the camera. Select [ Off] to reset the setting for the menu items to the default after turning off the camera.
  • Page 119 • The current zoom position in Intelligent Zoom or Digital Zoom will not be saved even if you set Zoom Position to On in Memory. • Even if you set Sensitivity to Off in Memory, the selected range for ISO Correction in AUTO is saved when the camera is turned off. Press the MENU button in Capture mode.
  • Page 120: Recording And Playback Of Sound

    Recording and Playback of Sound Recording Sound (Voice Recording Mode) You can record sound. The recordable time appears on the LCD monitor according to how much space is available on the SD Memory Card. Press the four-way controller (3) in Capture mode. The Mode Palette appears.
  • Page 121 Press the shutter release button. Recording stops. The remaining recordable time appears. Press the four-way controller (3) to display Mode Palette and change to another mode. You can exit the Voice Recording mode. • Sound is saved in WAVE monaural files. •...
  • Page 122: Playing Back Sound

    Playing Back Sound You can play back the recording you made in Voice Recording mode. Press the Q Playback button in the Voice Recording mode. Use the four-way controller (45) to select the recording to play back. Press the four-way controller (2). Playback starts.
  • Page 123: Adding A Voice Memo

    Adding a Voice Memo You can add a voice memo to a captured image. Recording a Voice Memo Enter the Playback mode and use the four-way controller (45) to select the image to which you want to add a voice memo. Press the four-way controller (3).
  • Page 124: Playing Back A Voice Memo

    Playing Back a Voice Memo Enter the Playback mode and use the four-way controller (45) to select the still picture with the voice memo that you want to play back. If U appears on the displayed image, a voice memo has been recorded. Press the four-way controller (2).
  • Page 125: Playback/Deleting/Editing

    Playback/Deleting/Editing Playing Back Images You can enjoy playback of images saved on the SD Memory Card and the built-in memory. Playing Back Still Pictures Press the Q Playback button. When an SD Memory Card is installed ? appears in the upper right corner of the LCD monitor and the images recorded on the SD Memory Card are played back.
  • Page 126: Calling Up The Images From The Built-In Memory

    Press the MENU button. Zoom playback ends. Setting the Quick Zoom Function You can display the image at maximum magnification simply by pressing x/y on the zoom button once during zoom playback. Press the MENU button. The [A Rec.Mode] menu appears. Press the four-way controller (5).
  • Page 127: Playing Back Movies

    Playing Back Movies You can play back movies (with the sounds). A guide to operation appears on the LCD monitor during playback. Operations include playback, frame by frame playback (forward or reverse), pause and volume adjustment. Enter the Playback mode and use the four-way controller (45) to select the movie to play back.
  • Page 128: Displaying Shooting Information In Playback Mode

    Displaying Shooting Information in Playback Mode In the Playback mode, press the OK/Display button to switch the “display modes”. There are 3 display modes for the Playback mode. Normal Display Shooting information is displayed. 1 Voice Memo icon 2 Card/Built-in memory icon 3 Folder name 5 Protect icon 7 Shooting date and time...
  • Page 129: Nine-Image Display/Calendar Display

    Nine-Image Display/Calendar Display Nine-Image Display You can display nine images at the same time. Enter the Playback mode and use the four-way controller (45) to select an image. Press w/f on the zoom button. Nine thumbnails of images are displayed at a time.
  • Page 130: Calendar Display

    Calendar Display In calendar display, the recorded images and sound files are displayed by date in calendar format. You can select images by date of shooting/ recording. In Playback mode, press w/f on the zoom button. Nine thumbnails of images appear. Press w/f on the zoom button.
  • Page 131: Slideshow

    Slideshow You can play back all the images on the SD Memory Card or in the built-in memory continuously. Enter the Playback mode and use the four-way controller (45) to select the image with which to start the slideshow. Press the four-way controller (3). The Mode Palette appears.
  • Page 132 Use the four-way controller (45) to select the effect. The effect is like a slide show that slides the displayed images one Wipe by one to the left. The current image gradually disappears and the next image Fade appears under it. Shrink The current image shrinks towards the center.
  • Page 133: Deleting Images, Movies And Sounds

    Deleting Images, Movies and Sounds Deleting a Single Image, Movie or Sound You can delete a single image, movie or sound. Once deleted, images, movies or sounds cannot be restored. Enter the Playback mode and use the four-way controller (45) to select the image, movie or sound to delete.
  • Page 134 Deleting a Voice Memo only If an image has a voice memo, you can delete the voice memo without deleting the image. Enter the Playback mode and use the four-way controller (45) to select an image with a voice memo to delete.
  • Page 135: Deleting All Images

    Deleting All Images You can delete all the images, movies and sounds at once. Once deleted, images, movies or sounds cannot be restored. Enter the Playback mode and press the Green button twice. The Delete All screen appears. Use the four-way controller (2) to select [Delete All].
  • Page 136: Deleting Selected Images And Sound Files (From Nine-Image Display)

    Deleting Selected Images and Sound Files (from Nine-Image Display) You can delete several images/sound files selected from the nine-image display at once. Enter the Playback mode and press w/f on the zoom button. Nine thumbnail images appear. Press the Green button. [P] appears on the images and sound files.
  • Page 137 Press the Green button. A confirmation dialog appears. Use the four-way controller (23) to select [Select & Delete]. Press the OK button. The selected images and sound files are deleted. You cannot delete protected images, movies or sounds. (1p.136)
  • Page 138: Protecting Images, Movies And Sounds From Deletion (Protect)

    Protecting Images, Movies and Sounds from Deletion (Protect) You can protect images, movies and sounds from being accidentally deleted. Enter the Playback mode and use the four-way controller (45) to select the image, movie or sound to protect. Press the four-way controller (3). The Mode Palette appears.
  • Page 139 Use the four-way controller (23) to select [Protect]. Press the OK button. • Select Unprotect in Step 7 to cancel the Protect setting. • If the image, movie or sound is protected, the when it is played back. Protecting All Images, Movies and Sounds You can protect all the images, movies and sounds.
  • Page 140: Viewing Images On Av Equipment

    Viewing Images on AV Equipment By using the AV cable, you can capture, play back and dub images on a TV or other equipment with a video IN jack. Make sure that both the AV equipment and the camera are turned off before connecting the cable.
  • Page 141: Playing Back An Image Using The Remote Control Unit (Optional)

    • If you intend to use the camera for a long time, use of the AC adapter kit K-AC63 (optional) is recommended. Refer to the operating manual for the TV or equipment to which the camera is connected. • Images may not be displayed properly depending on the countries or areas when the Video Out setting is the default.
  • Page 142: Setting The Printing Service (Dpof)

    Setting the Printing Service (DPOF) You can print the images on the SD Memory Card using a DPOF (Digital Print Order Format) compatible printer or at a printing service. Printing Single Images Set the following items for each image. [Copies]: Select the number of copies up to a maximum of 99. [Date] : Specify whether you want the date imprinted on the print or not.
  • Page 143 Use the four-way controller (23) to select the number of copies. Use the Green button to select [O (On)/P (Off)] of [Date]. O (On) : The date will be imprinted. P (Off) : The date will not be imprinted. Press the OK button. Prints can be made according to the settings.
  • Page 144: Printing All Images

    Printing All Images Enter the Playback mode and press the four-way controller (3). The Mode Palette appears. Use the four-way controller (2345) to select (DPOF). Press the OK button. Use the four-way controller (3) to select [All Images]. Press the OK button. Use the four-way controller (23) to select the number of copies.
  • Page 145: Direct Printing Using Pictbridge

    Direct Printing Using PictBridge By connecting the camera to a printer that supports PictBridge using the USB cable (I-USB7) supplied with the camera, you can print images directly from the camera without using a PC. Select the images you want to print and the number of copies on the camera after it has been connected to the printer.
  • Page 146: Printing Single Images

    Printing Single Images Use the four-way controller (23) to select [Single Image]. Press the OK button. The Print this image screen appears. Use the four-way controller (45) to select the image to print. Use the four-way controller (23) to select the number of copies. You can print up to 99 copies.
  • Page 147: Printing All Images

    Use the four-way controller (2345) to select the paper size. You can select only the paper sizes available with the printer you are using. Press the OK button. Repeat Step 8 to 10 to set [Paper Type] [Quality] and [Border Status].
  • Page 148: Printing Using The Dpof Settings

    Printing Using the DPOF Settings Use the four-way controller (23) to select [DPOF AUTOPRINT]. Press the OK button. The DPOF AUTOPRINT screen appears. Use the four-way controller (45) to check the images and the print settings. Confirm the number of copies, the setting of the date, and the print setting, and then start printing.
  • Page 149: Editing Images

    Editing Images Changing the Image Size and Quality By changing the size and quality of a selected image, you can make the file smaller than the original. You can use this function to continue taking pictures when the card or memory is full, by making the images smaller and overwriting the original images to make more space available in the memory.
  • Page 150 Use the four-way controller (45) to change the size. Press the four-way controller (3). The frame moves to [Quality Level]. Use the four-way controller (45) to change the quality. Press the OK button. Use the four-way controller (23) to select [Overwrite] or [Save as].
  • Page 151: Cropping Images

    Cropping Images You can crop a part of a picture and save it as a separate image. Use the four-way controller (45) in Playback mode to select an image to crop. Press the four-way controller (3). The Mode Palette appears. Use the four-way controller (2345) to select Press the OK button.
  • Page 152: Rotating The Displayed Image

    Rotating the Displayed Image You can rotate a displayed image on the LCD monitor. In Playback mode, use the four-way controller (45) to select the image to be rotated. Press the four-way controller (3) in Playback mode. The Mode Palette appears. Use the four-way controller (2345) to select s (Image Rotation).
  • Page 153: Editing Pictures With Color Filters

    Editing Pictures with Color Filters This function enables you to edit still pictures with color filters. You can select from thirteen filters: [B&W], [Sepia], [Eight colors], [B&W + Red], [B&W + Green], and [B&W + Blue]. Use the four-way controller (45) in Playback mode to select an image to edit.
  • Page 154 Selecting the Color Filter (Eight Colors) Use the four-way controller (23) to select colors). The color bar appears. Use the four-way controller (45) to select a desired color. Press the OK button. The Overwrite confirmation screen appears. Use the four-way controller (23) to select [Overwrite] or [Save as].
  • Page 155: Editing Pictures With The Digital Filter

    Editing Pictures with the Digital Filter This function enables you to apply special effects to still pictures with the digital filter. You can select from five filters: [Soft], [Illustration], [Special Effect 1], [Special Effect 2] and [Slim]. Use the four-way controller (45) in Playback mode to select an image to edit.
  • Page 156 Use the four-way controller (23) to select [Overwrite] or [Save as]. Press the OK button. The edited image is saved with the same number of recorded pixels and quality level as the original. Selecting the Slim Filter Press the four-way controller (23) to select Press the four-way controller (45) to adjust the strength of the...
  • Page 157: Editing Pictures With Brightness Filter

    Editing Pictures with Brightness Filter This function enables you to adjust the brightness of still pictures with the brightness filter. Use the four-way controller (45) in Playback mode to select an image to edit. Press the four-way controller (3). The Mode Palette appears. Use the four-way controller (2345) to select &...
  • Page 158 Press the OK button. The overwrite confirmation screen appears. Use the four-way controller (23) to select [Overwrite] or [Save as]. Press the OK button. The edited image is saved with the same number of recorded pixels and quality level as the original.
  • Page 159: Editing Movies

    Editing Movies You can select a frame from a recorded movie to save as a still picture or divide a movie into two. Use the four-way controller (45) in Playback mode to select a movie to edit. Press the four-way controller (3). The Mode Palette appears.
  • Page 160 Press the four-way controller (2) to play back a movie. Press (2) again to pause the movie at the point you want to save. The following operations are available during pause. Four-way controller (4): Reverses the Four-way controller (5): Advances the movie frame by frame. Press the OK button.
  • Page 161 Extracting Movies Select [Extract] on the Movie Edit screen. Press the OK button. The Extract screen appears. Press the four-way controller (2) to play back the movie and press it again to select the desired start point. The movie is paused. The following operations are available during pause.
  • Page 162: Removing Red-Eye

    Removing Red-eye You can remove red-eye (a phenomenon that occurs when the flash reflects from the subject’s eyes) from your pictures. In Playback mode, press the four-way controller (45) to select the image you want to correct. Press the four-way controller (3). The Mode Palette appears.
  • Page 163 Removing Red-eye Manually If the camera does not detect the red-eye, remove it manually. Press the OK button. The message [Select the area to compensate] and the screen for specifying the area for compensation appears. Specify the area for compensation. Four-way controller : Moves the area.
  • Page 164: Adding A Frame (Frame Composite)

    Adding a Frame (Frame Composite) This function lets you add a decorative frame to still pictures. There are three frames already stored in the camera. Use the four-way controller (45) in Playback mode to select the image to which you want to add a frame.
  • Page 165 Use the four-way controller (45) to select the frame you want to register and press the OK button. The frame is registered in the built-in memory and replaces the frame selected in Step 1. Visit the PENTAX website at the URL below to download new frames. http://www.pentax.co.jp/english/support/digital/frame_02.html...
  • Page 166: Copying Files

    Copying Files You can copy image and sound files from the built-in memory to the SD Memory Card and vice versa. This function can only be selected when a card has been inserted in the camera. When files are copied from the built-in memory to the SD Memory Card, all the files are copied at once.
  • Page 167 To Copy Files from the Built-in Memory to the SD Memory Card Use the four-way controller (23) to select [ OK button. All the files are copied to the SD Memory Card. To Copy Files from the SD Memory Card to the Built-in Memory Use the four-way controller (23) to select [ and press the OK button.
  • Page 168: Settings

    Settings Camera Settings Setting Up the Start-up Screen You can display an image recorded with the camera as the start-up screen when the camera is turned on. Press the four-way controller (3) in Playback mode. The Mode Palette appears. Press the four-way controller (2345) to select Screen).
  • Page 169 Setting Up the Start-up Screen Using a Captured Image (Go to Step 5 to select a start-up screen other than USER) Press the Green button, while displaying [USER] in the upper- right corner of the screen, and use the four-way controller (45) to select an image for the start-up screen, and press the OK button.
  • Page 170: Formatting An Sd Memory Card Or The Built-In Memory

    How to recall the [H Set-up] menu Formatting an SD Memory Card or the Built-in Memory Formatting will delete all the files on the SD Memory Card if you are using a card, and all the files in the built-in memory if there is no SD Memory Card inserted.
  • Page 171: Changing The Sound Settings

    Set-up Format Sound Date Adjust World Time Language/ Folder Name Exit MENU Changing the Sound Settings You can adjust the playback volume and the volume of operation sounds, such as the start-up sound, shutter sound and operation sound. You can also change the operation sounds. Select [Sound] on the [H Set-up] menu.
  • Page 172 How to recall the [H Set-up] menu Changing the Sound Use the four-way controller (23) to select [Start-up Sound]. Press the four-way controller (5). The pull-down menu appears. Use the four-way controller (23) to select [1], [2], [3] or [Off]. Press the OK button.
  • Page 173 Set-up Format Sound Date Adjust World Time Language/ Folder Name Exit MENU Changing the Sound (Using a Recorded Sound File) You can use the sound recorded on the camera for sound settings. The first two seconds of the selected sound file will be played as [USER] sound.
  • Page 174: Changing The Date And Time

    How to recall the [H Set-up] menu Changing the Date and Time You can change the initial date and time settings. You can also set the style in which the date appears on the camera. Select [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd]. Select [Date Adjust] on the [H Set-up] menu.
  • Page 175 Set-up Format Sound Date Adjust World Time Language/ Folder Name Exit MENU Press the four-way controller (3). The frame moves to [Date]. Press the four-way controller (5). The frame moves to month. Use the four-way controller (23) to change the month. Change the day and year in the same manner.
  • Page 176: Setting The World Time

    How to recall the [H Set-up] menu Setting the World Time The date and time selected in “Initial Settings (Setting the Display Language and the Date and Time)” (p.28) serve as the Home Time setting. You can display the time in a city other than the Home Time city (World Time).
  • Page 177 Set-up Format Sound Date Adjust World Time Language/ Folder Name Exit MENU Use the four-way controller (3) to select [DST]. Use the four-way controller (45) to select [O (On) / P (Off)]. Select [O (On)] if the Destination city uses daylight saving time. Press the OK button.
  • Page 178: Changing The Display Language

    How to recall the [H Set-up] menu Changing the Display Language You can change the language in which the menus, error messages, etc. are displayed. You can select from [English], [French], [German], [Spanish], [Portuguese], [Italian], [Dutch], [Danish], [Swedish], [Finnish], [Polish], [Czech], [Hungarian], [Turkish], [Russian], [Thai], [Korean], [Chinese (traditional and simplified)] and [Japanese].
  • Page 179: Changing The Image Folder Name

    Set-up Format Sound Date Adjust World Time Language/ Folder Name Exit MENU Changing the Image Folder Name You can select the folder name style from [Standard] or [Date]. When you select [Date], pictures and sound files are saved in separate folders of the shooting/recording date.
  • Page 180: Changing The Usb Connection Mode

    How to recall the [H Set-up] menu Changing the USB Connection Mode You can change the USB Connection mode depending on whether the USB cable is to be connected to a printer (PictBridge) or a computer. Select [USB Connection] on the [H Set-up] menu. Press the four-way controller (5).
  • Page 181: Changing The Video Output Format

    Set-up Format Sound Date Adjust World Time Language/ Folder Name Exit MENU Changing the Video Output Format You can select the output format (NTSC or PAL) for taking or playing back images on a TV. Select [Video Out] on the [H Set-up] menu. Press the four-way controller (5).
  • Page 182: Adjusting The Brightness Of The Lcd Monitor

    How to recall the [H Set-up] menu Adjusting the Brightness of the LCD Monitor You can adjust the brightness of the LCD monitor by seven levels. Select [Brightness Level] on the [H Set-up] menu. Use the four-way controller (45) to adjust the brightness.
  • Page 183: Setting Power Saving

    Set-up Format Sound Date Adjust World Time Language/ Folder Name Exit MENU Setting Power Saving By setting the LCD monitor to dim automatically when you leave the camera without performing any operations for a certain period, you can lessen battery drain. When Power Saving takes effect and the LCD monitor dims, press any button to return to the ordinary brightness.
  • Page 184: Setting Auto Power Off

    How to recall the [H Set-up] menu Setting Auto Power Off You can set the camera to turn off automatically when no operation is performed after a fixed time. Select [Auto Power Off] on the [H Set-up] menu. Press the four-way controller (5). The pull-down menu appears.
  • Page 185: Setting The Guide Display

    Set-up Format Sound Date Adjust World Time Language/ Folder Name Exit MENU Setting the Guide Display You can show the information on the current mode and the functions currently assigned to the Green button when you start up the camera in Capture mode or switch from other modes to Capture mode.
  • Page 186: Appendix

    Appendix List of City This is a list of cities which you can select for the World Time. Region Honolulu North America Anchorage Vancouver San Francisco Los Angeles Calgary Denver Chicago Miami Toronto New York Halifax Mexico City Central and South Lima America...
  • Page 187: Default Settings

    Default Settings The table below lists the factory default settings. Last Memory Setting Yes : The current setting (last memory) is saved when the camera is turned off. No : The setting returns to the default setting when the camera is turned off.
  • Page 188 Item Flash Mode Drive Mode Focus Mode Zoom Position MF Position Memory White Balance AE Metering Sensitivity EV Compensation Digital Zoom DISPLAY File # Green Button Sharpness Saturation Contrast Date Imprint Set-up] Menu Item Format Operation Volume Playback Volume Start-up Sound Sound Shutter Sound Operation Sound...
  • Page 189: Playback Mode Palette Items

    Item Language/ Folder Name USB Connection Video Out Brightness Level Power Saving Quick Zoom Auto Power Off Guide Display Reset Playback Mode Palette Items Item Interval Slideshow Screen Effect Sound Effect Resize Cropping Image/Sound Copy Image Rotation Color Filter Digital Filter Brightness Filter &...
  • Page 190 Available functions for each Capture mode Auto Flash Off Flash On Flash Mode Auto + Red-eye Flash On + Red-eye Soft Flash Self-timer Drive Continuous Shooting Mode Remote Control Standard (Autofocus) Macro Super Macro Focus Mode Pan Focus Infinity Manual Focus Recorded Pixels Quality Level White Balance...
  • Page 191 × *10: Fixed to Off. *11: Fixed to Center-weighted. *12: Available only when Movie SR is set to Off. *13: Set to Automatic tracking AF. (changeable) × Auto – Flash Off – × Flash On – × Auto + Red-eye –...
  • Page 192: Optional Accessories

    Optional Accessories A number of dedicated accessories are available for this camera. Products with an asterisk (∗) are the same as those supplied with the camera. Power related accessories Rechargeable lithium-ion battery D-LI68 (∗) Battery charger kit K-BC68 (∗) (Set includes battery charger D-BC68 and AC plug cord.) AC adapter kit K-AC63 (Set includes AC adapter D-AC63 and AC plug cord.) Connection cables...
  • Page 193: Messages

    Messages Messages such as the following may appear on the LCD monitor during camera operation. Message Compression error Compression of the image you captured has failed. Change the quality/size and try again. No image/sound There are no images/sounds on the SD Memory Card or in the built-in memory.
  • Page 194 Message Battery depleted Image folder cannot be created Protected This image/sound cannot be processed No image to be processed Messages such as the following may appear on the LCD monitor when using the PictBridge function. Message No paper in the printer No ink in the printer Printer error Data error...
  • Page 195: Troubleshooting

    Troubleshooting Problem Cause The camera will The battery is not not turn on installed The battery is installed incorrectly The battery is exhausted Charge the battery. (p.17) The battery performance has temporarily deteriorated because it is too cold No image The LCD monitor is set appears on the to Off...
  • Page 196 Problem The subject is The subject is difficult to not in focus focus on The subject is not in the focusing area The subject is too close Set the focus mode to q (Macro) or The focus mode is set to q (Macro) or r (Super Macro) The flash does...
  • Page 197: Main Specifications

    Main Specifications Camera Type Fully automatic compact digital still camera with built-in zoom lens Effective Pixels 10.0 megapixels Sensor 10.37 megapixels (total pixels), 1/1.8-inch interline transfer CCD with a primary color filter Recorded Pixels Still Picture Movie ISO sensitivity AUTO (64 to 800, 64 to 1600 in Digital SR mode) *You can change the Auto sensitivity range from the menu.
  • Page 198 White Balance Lens Intelligent Zoom Digital Zoom LCD Monitor Playback Functions Focusing System Exposure Mechanism Capture Modes Movie Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual Focal Length 7.9 mm - 23.7 mm (equivalent to 38 mm - 114 mm in 35 mm format) Maximum Aperture f/2.8 - f/5.4 Lens Composition...
  • Page 199 * The number of recordable images are based on the CIPA standard measurement, but it may vary with the conditions under which the camera is used. Approx. 170 min. * Measured based on PENTAX standard and may vary depending on the condition of use. Approx. 115 min.
  • Page 200: Warranty Policy

    Shipping charges are to be borne by the owner. If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country.
  • Page 201 Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
  • Page 202 For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 203: Declaration Of Conformity

    Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals PENTAX IMAGING COMPANY A Division of PENTAX of America, Inc. Located at: 600 12 Golden, Colorado 80401 U.S.A. Phone: 303-799-8000 FAX: 303-790-1131 Declare under sole responsibility that the product identified herein, complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device.
  • Page 204 Information on disposal for users 1. In the European Union If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. There exists a separate collection system for these products. Used electric/electronic equipment...
  • Page 205: Index

    Index Symbols [A Rec.Mode] menu ..44 [H Set-up] menu ... . . 44 Q Playback button ..40, 41, 43 Q (Playback mode) .
  • Page 206 Exposure ....104 Face recognition ... . . 66 Flash ..... . 13 Flash Mode .
  • Page 207 Power Saving ....181 Power switch ....13 Printer ....143 Program Mode .
  • Page 208 PENTAX Italia S.r.l. PENTAX (Schweiz) AG PENTAX Scandinavia AB PENTAX Imaging Company A Division of PENTAX of America, Inc. PENTAX Canada Inc. • Specifications and external dimensions are subject to change without notice. 57912 2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pentax.co.jp/)

This manual is also suitable for:

19342 - optio s10 10mp digital camera

Table of Contents