Using The Self-Timer - Pentax OPTIO VS20 Operating Manual

To Cancel after Taking the First or Second Frame
1
After shooting the first frame in Step 6 or second frame
in Step 7, press the 4 button or the four-way
controller (3).
A confirmation dialog appears.
2
Use the four-way controller (23)
to select an option and press the
4 button.
3
Save:
Discard: Discards the captured image(s) and you can retake the first
Cancel: Returns to the previous shooting screen.

Using the Self-timer

In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod when taking a picture with the self-timer.
Use this mode when you want to be included in a group picture. The picture
g
is taken approximately ten seconds after the shutter release button is pressed.
Use this mode to avoid camera shake. The picture is taken approximately two
Z
seconds after the shutter release button is pressed.
90
Saves the captured image(s)
and you can retake the first
frame. When this option is
selected after shooting the
second frame, the first and the second frames are stitched
and a stitched image appears.
frame.
Save the image(s) and Save the image(s) and
exit this screen? exit this screen?
Save
Discard
Cancel
OK
OK OK