Switching The Face Detection Function - Pentax OPTIO VS20 Operating Manual

4
Press the four-way controller (2) to select [Delete].
5
Press the 3 button.
The registration is released, and the face disappears from the face list
screen.

Switching the Face Detection Function

The camera comes with a Face Detection function that spots the faces
in your shot and automatically adjusts the focus and exposure for the
faces. It will automatically release the shutter when people are smiling
(Smile Capture function/Smile), or if anyone blinked, it will tell you that
so you can take the shot again until it is perfect (Blink Detection). The
default setting is [On] for [Face Detection] and O (On) for [Blink
Detection].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select
[Face Detection].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select an option.
On The camera detects a person's face.
The camera automatically release the
Smile
shutter when your subject smiles.
The camera does not detect a person's
Off
face.
5
Press the 4 button.
The setting is saved.
6
To set the Blink Detection function, press the four-way
controller (3) to select [Blink Detection].
Rec. Mode 2/4
D-Range Setting
Shake Reduction
Face Recall
Face Detection On
Blink Detection Smile
Off
Digital Zoom
Cancel
MENU
3
OK
OK
117