Pentax OPTIO VS20 Operating Manual page 98

3
Press the four-way controller (3).
4
Use the four-way controller (45)
to select the amount of exposure
change.
Select from.[ ±0.3 EV], [±0.7 EV], and
[±1.0EV]
5
Press the OK button.
3
The setting is saved and the camera returns to capture status in Auto
Bracketing mode.
6
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
7
Press the shutter release button fully.
Three pictures with different exposure are taken
• In b (Auto Picture), 9 (Green), S (Fireworks), F (Digital
Panorama), or N (Frame Composition), you cannot select Auto
Bracketing.
• In Auto Bracketing mode, Blink Detection is fixed at Off.
96
±0.7EV ±0.7EV 0.7EV
Drive Mode Drive Mode Drive Mode
Auto Bracketing Auto Bracketing Auto Bracketing
F5.6 Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel
MENU MENU MENU MENU MENU
OK OK
OK