Pentax OPTIO VS20 Operating Manual page 93

Pantex
Hide thumbs Also See for OPTIO VS20:
Table of Contents

Advertisement

1
Press the four-way controller (2) in A mode.
2
Use the four-way controller
(453) to select g or Z and press
the 4 button.
The camera is ready to take the picture
using the self-timer.
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
When set to g, the self-timer lamp lights. The self-timer lamp blinks
during the last 3 seconds before shooting or when set to Z.
The picture is taken ten seconds or two seconds later.
• Focusing may be compromised if you move the camera while the self-
timer lamp is blinking when taking still pictures.
• The self-timer lamp does not light up or blink in H (Pet) mode.
• In movie recording mode, recording will start after ten seconds (or two
seconds).
• Press the shutter release button halfway while the self-timer is engaged
to stop the countdown and press fully to restart the countdown.
• Z cannot be selected while 9 (Green) mode is in default setting. Select
Z in another shooting mode and then switch the shooting mode to 9.
Shutter release button
Four-way controller
4 button
Shutter release button
for vertical shooting
Drive Mode
Self-timer
F5.6
F5.6
F5.6
F5.6
Cancel
MENU
3
OK
OK
91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents