Setting The Auto Iso Range - Pentax Optio RZ18 Black Operating Manual

4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The setting is saved.
6
3
Press the 3 button.
The camera returns to capture status.
• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944).
• When set to 9 (Green) or C (Movie) mode, only AUTO (sensitivity 80
- 800) is available.
• When set to c (Digital SR) mode, only AUTO (sensitivity 80 - 6400)
is available.
• When set to S (Fireworks) mode, the sensitivity is fixed at its
minimum setting.
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.123).
Saving the Sensitivity setting 1p.131

Setting the AUTO ISO Range

Set the sensitivity range when the sensitivity is set to AUTO.
You can select from 80-100, 80-200, 80-400, 80-800, and 80-1600.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AUTO ISO
Range].
3
Press the four-way controller (5).
A pull-down menu appears.
116
Rec. Mode 1/4
Recorded Pixels
White Balance AWB
AUTO
AF Setting 80
AE Metering 100
Sensitivity 200
Auto
400
AUTO ISO Range 0.0
Cancel
MENU
OK
OK