Printing All Images - Pentax OPTIO VS20 Operating Manual

Printing All Images

When you choose the number of copies and whether or not to insert the
date, the settings are applied to all the images stored in the camera.
1
Display the screen for DPOF settings in Q mode.
Refer to Steps 1 to 3 on p.171.
2
Use the four-way controller (23) to select [All Images].
3
Press the 4 button.
The message [Applies DPOF settings to all images] appears.
4
Choose the number of copies and
whether to insert the date or not.
Refer to Steps 6 and 7 in "Printing Single
Images" on p.172 for details on how to
make the settings.
5
Press the 4 button.
The settings for all the images are saved and the camera returns to the
DPOF setting screen.
\
The number of copies specified in the [All Images] setting applies to all
the images. Before printing, check that the number is correct.
Settings for single images are canceled when settings are made with [All
Images].
Applies DPOF settings Applies DPOF settings
to all images to all images
0 1
Copies
Date
Date Date
Cancel Cancel Cancel
MENU
5
OK OK OK
OK
173