Setting The Auto Power Off Function - Pentax OPTIO VS20 Operating Manual

Setting the Auto Power Off Function

You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) twice.
2
Use the four-way controller (23) to select [Auto Power
Off].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the time until the camera
turns off automatically.
Choose from [5min.], [3min.] or [Off].
6
5
Press the 4 button.
The setting is saved.
Auto Power Off does not function in the following situations:
- while recording a movie
- during a slideshow or movie playback
- while the camera is connected to a computer
188
Setting
Video Out NTSC
Brightness Level
5sec.
Power Saving
Auto Power Off
5min.
Reset 3min.
Delete all Off
Cancel Cancel
MENU
2/3
OK OK OK
OK K