Pentax OPTIO VS20 Operating Manual page 59

7
Press the 4 button or the four-way controller (4).
The setting is saved and then the camera is ready for setting the other
functions. To exit the settings, press the 3 button.
To use another operation, refer to the following alternate Step 7 options.
To Save the Setting and Start Taking Pictures
7
Press the shutter release button halfway.
The setting is saved and the camera returns to capture status.
When the shutter release button is pressed fully, the picture is taken.
When the [W Setting] menu is displayed from Q mode, you can switch
to A mode by pressing the Q button.
To Save the Setting and Start Playback of Images
7
Press the Q button.
When the [A Rec.Mode] menu is displayed from A mode, the setting
is saved and the camera returns to playback status.
To Cancel the Changes and Continue with Menu Operations
7
Press the 3 button.
The changes are canceled and the screen returns to Step 3.
The 3 button function differs depending on the screen. Refer to the
guide indications.
MENU
Exit
MENU
MENU
Cancel : Cancels the current selection, exits the menu and
: Exits the menu and returns to the original screen.
: Returns to the previous screen with the current
setting.
returns to the previous screen.
2
57