Star Trac Pro S Owner's Manual page 18

For units with scale system (ELITE), connect the cables 715-3595
and 715-3595 (tagged "TO LOAD CELL RIGHT" and "TO LOAD
CELL LEFT") directly to load cell cables 715-3667 RIGHT and
715-3667 LEFT.
7. Final Assembly
Re-install the shroud over the motor compartment, and secure in place with the previously removed screws. Insert the
four plastic
buttons into the screw access holes at the bottom of the neck assembly.
TRAC ELITE Treadmill has undergone a detailed system calibration at our factory and does not require calibration after
the unit has been removed from its original factory packaging.
You have now completed the assembly of your STAR TRAC PRO S / PRO / ELITE TREADMILL.
16
Step 7a
Securely tighten all hardware installed during assembly. If neces-
sary, level your treadmill using the two adjustable feet under the
tailroller. Loosen the lock nuts, rotate the feet until the treadmill is
stabilized, and retighten the lock nuts.
NOTE: Perform a visual inspection, and test the features and func-
tions of the unit, prior to use. The weight scale system on your STAR
STAR TRAC PRO S / PRO / ELITE TREADMILL O
Step 6c
Step 7b
' M
WNER S ANUAL