Panasonic WJ-SX550A Operating Instructions Manual page 107

8. Press the Decrement (DEC - 1CAM) Switch to move a
sequence one step backward from the step that was
previously stopped by the Stop (STOP) Switch.
DEC
-1CAM
P-Seq
Monitor 16
9. Press the Forward Sequence (FORWARD SEQ)
Switch, after pressing the Alternate (ALT) Switch, to
start the Program Sequence from the beginning of the
sequence pattern that was previously stopped by the
Stop (STOP) Switch.
FORWARD
SEQ ALT
10. To cancel the Program Sequence select a camera.
Refer to the Camera Selection on page 98.
7-2 Tour Sequence
The following functions are available only if a Tour
Sequence has been previously established through the Set
Up Menu. As described on page 70, any one of 32 tours
can be assign to any one of 16 monitors.
1. Select the desired monitor.
Refer to the Monitor Selection on page98.
Stop
2. Select the desired Tour Sequence number by press-
ing the Numeric Keys.
A1
Camera
Monitor 16
1
4
7
MON
ESC
Camera
Monitor 16
3. Press the Forward Sequence (Forward SEQ) Switch
to run the Tour Sequence.
T-Seq
Monitor 16
4. Press the Stop (STOP) Switch to stop the Tour
Sequence.
T-Seq
Monitor 16
5. Press the Forward Sequence (FORWARD SEQ)
Switch to continue a sequence that was previously
stopped by the Stop (STOP) Switch. The sequence
will continue in the forward direction from the step that
was selected at the time the Stop Switch was pressed.
T-Seq
Monitor 16
-103-
01
2 3
5 6
8 9
0
CAM
SET
01 1
FORWARD
SEQ
01
STOP
01 Stop
FORWARD
SEQ
01
6