Set Up Alarm Mode - Panasonic WJ-SX550A Operating Instructions Manual

13. Set Up Alarm Mode 2

This table can be set up only after the alarm mode is set to the Off mode in the Alarm Mode Select table.
r
1. Move the cursor to the 4 position by moving the Joystick Controller, then press the Set (SET) Key.
2. Move the cursor to the 5 position by moving the Joystick Controller.
5
Enter the desired dwell time, 1-30, by pressing the Numeric Keys.
3. Move the Cursor to the 6 position by moving the Joystick Controller.
Press the Function (F4) Key to open the Pop Up Window, select the desired Auto Reset (RST) time by moving the Joystick
Controller, then press the Set (SET) Key to execute the selection.
Selected Time in the Window: 30, 60, 90, 120, 150, 180, Off
In this position, press the Increment (INC) Switch or Decrement (DEC) Switch repeatedly to select the Auto Reset (RST) time
from 1 second to 60 seconds with 1 second increments or decrements.
4. Press the Escape (ESC) Key to escape from the programming mode. The cursor returns to the 4 position.
q w
S e t U p P R O G . A l a r m
S e t U p A l a r m M o d e 2
D w e l l 0 5 s e c
A u t o R S T 9 0 s e c
F 1 : - - F 2 : - -
e t y
M o d e 2
F 3 : D E L F 4 : P o p U p
-78-