Major Operating Controls And Their Functions; I Wj-Sx650 Matrix Switcher/Wj-Sx650U Card Cage - Panasonic WJ-SX650/G Operating Instructions Manual

Major Operating Controls and Their Functions

I WJ-SX650 Matrix Switcher/WJ-SX650U Card Cage

G Front View
<Front panel attached>
w
OPERATE
OPERATE LED WILL BLINK
IF COOLING FAN MALFUNCTIONS
q
q Operation Indicator (OPERATE)
• This indicator is lighting while power is supplied to the
unit.
• This indicator blinks when the cooling fan has a trouble.
(Refer to p. 90.)
w Front Panel Fixing Screws
Before you press the power switch or install boards into
the expansion slot, these screw are removed to detach
the front panel
e Power Switch
r Expansion Slot
Optional video input or output main board is installed.
(Video Input Board WJ-PB65C32 or Video Output Board
WJ-PB65M16)
For WJ-SX650U, optional video input main board is
installed. (Video Input Board WJ-PB65C32)
<Front panel detached>
PULL
POWER
ON
OFF
650 650
Matrix Switcher WJ-SX
Normally, do not touch.
e
(Reserved for service personnel)
t Video Input Board*
This is a video input main board. This board controls
cameras and alarm sensors (door switch, etc.).
Note: Refer to p. 11 WJ-PB65C32 Video Input Board for
details.
y Video Output Board*
This is a video output main board. This board controls
monitors and alarm output signals.
Note: Refer to p. 12 WJ-PB65M16 Video Output Board
for details.
* For WJ-SX650U, t and y are expansion slots.
RESET No. MODE
TEST
RESET MODE
y
This is the illustration of WJ-SX650.
t
r
9