Logging On To Administrator Mode - Konica Minolta BIZHUB 350 User Manual

3
No.
5
6
7
8
9
10
Note
To reset the status display and message display, click [Refresh] in the
browser.

Logging on to Administrator mode

You can switch between User mode and Administrator mode. However, you
must be logged on to Administrator mode in order to specify system or net-
work settings.
0 When logged on to Administrator mode, the control panel of this machine
is locked and cannot be used.
0 Depending on the status of the machine, you may not be able to log on
to Administrator mode.
0 When logged on to Administrator mode, a timeout occurs and you will
automatically be logged off from Administrator mode if no operation is
performed for 10 minutes.
3-34
Utility/Counter screen and PageScope Web Connection
Item
Message display
Device name
[Log-out] button
Tabs
Menu
Information and settings
Description
If an error occurred in the machine, the status
of the malfunction/error and other error infor-
mation are displayed.
The name of the device being accessed is dis-
played.
This button appears after you have logged on
when user authentication or external server
authentication settings have been applied.
Click this button to log off.
Select the category of the page to be dis-
played. The following tabs are displayed in
User mode.
• System
• Job
• User Box
• Print
• Scan
Note
If the optional fax kit has been in-
stalled, the Scan tab changes to the
Fax/Scan tab.
Information and settings for the selected tab
are listed. The menu that appears differs de-
pending on the tab that is selected.
Details of the item selected from the menu are
displayed.
200/250/350