Available Functions/Parameters - Konica Minolta BIZHUB 350 User Manual

2

Available functions/parameters

Touch [Quality & Reduction] or [Menu] in the screen that appears after the
[Fax/Scan] key in the control panel is pressed, and then specify settings for
the following functions/parameters when saving the scanned document.
Note
The following Quality & Reduction parameters have no effect, even if set-
tings have been specified.
- "Reduction" on the Reduction/Area tab
Quality/Reduction screen
Parameter
Quality
Density
Reduction/
Area
Note
The following Menu functions and parameters have no effect, even if set-
tings have been specified.
- "TSI" on the Setting 1 tab
- "Rotation TX" on the Setting 1 tab
- "Subject Selection" on the Network tab
- "Reply Address" on the Network tab
Menu screen
Function
Setting 1
2-4
Description
Select the scanning resolution (amount of details).
Specify the density for scanning.
Original Select the desired standard size for the area to be
Size Set. scanned.
Description
TX Report Select the conditions for printing the results report.
2in1 Select whether or not to send the data using the "2in1"
function (reducing two pages to fit in a single page).
2-Sided TX Select whether or not a double-sided transmission is
performed. The position of the binding margin and the
page orientation can also be specified.
Saving and printing documents
Page
Reference
p. 2-8
p. 2-9
p. 2-11
Page
Reference
p. 2-12
p. 2-14
p. 2-15
200/250/350