Registering A Relay Box - Konica Minolta bizhub 181 User Manual

5
4
Select "DELETE", and then press the [OK] key.
5
Use the keypad to type in the registered box ID (four digits), and then
press the [OK] key.
– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
The "FAX REGISTRATION" menu appears again.

Registering a relay box

A relay box ID must first be specified in order for this machine (acting as a
relay station) to receive a document from another fax machine (relay initiating
station), then transmit the document to multiple recipients (receiving sta-
tions).
Note
A relay box ID cannot be the same as a mailbox ID.
This machine (acting as a relay station) can be set to send back a relay
result report. The fax number of the recipient of the report (either the relay
initiating station or any other recipient) must be specified using either a
one-touch dial key, speed dial number or the keypad. Therefore, if the
recipient is to be specified using a one-touch dial key or speed dial
number, be sure that the one-touch dial key or speed dial number is first
programmed with the fax number of the recipient of the report.
5-52
Utility mode/Fax mode parameters
Fax kit FK-506