Faxing After Completing A Telephone Call (Manual Faxing) - Konica Minolta bizhub 181 User Manual

Faxing
2.7 Faxing after completing a telephone call (manual fax-
ing)
If a telephone is connected to the machine and the same line is used for
phoning and faxing, the document can be sent immediately after talking with
the recipient over the telephone.
This feature is useful, for example, if you wish to notify the recipient that you
are sending a fax.
!
Detail
Memory transmission cannot be performed with a manual transmission.
If the recipient's fax machine is set to receive faxes automatically (auto-
matic reception), a beep is sounded without the recipient answering the
telephone. In this case, you cannot talk to the recipient.
When faxing after completing a telephone call, feed the document using
the document feeder.
A manual transmission can be performed when a telephone is connected
to the TEL port of this machine.
Even when pulse dialing is being used, typing in " " produces signals for
tone dialing.
1
Load the document into the document feeder.
– Refer to "Positioning the document" on page 2-6.
2
If necessary, select the Quality setting.
– For details on selecting the Quality setting, refer to "Selecting the
fax quality" on page 2-10.
3
Pick up the telephone receiver.
– Check that the dial tone can be heard.
Fax kit FK-506
2
2-29