Utility Mode" Menu - Konica Minolta bizhub 181 User Manual

5
5 Utility mode/Fax mode parameters
5.1

"UTILITY MODE" menu

The "UTILITY MODE" menu contains 13 items.
Items 1, 5 and 8 through 12 in the following table are described in this man-
ual. For details on items 2 through 4, 6 and 7, refer to the User's Guide of the
copier. For details on item 13, refer to the User's Guide for optional image
controller IC-206 or for network interface card NC-503.
!
Detail
Depending on the options installed, some parameters may not be avail-
able. If an unavailable parameter is selected, an error message appears.
No. Menu name
1 MACHINE SETTING
2 PAPER SOURCE SET-
UP
3 CUSTOM SIZE MEM-
ORY
4 USER MANAGEMENT
5 ADMIN. MANAGE-
MENT
6 COPY SETTING 1
7 COPY SETTING 2
8 DIAL REGISTRATION
9 FAX REGISTRATION
10 FAX TX OPERATION
11 FAX RX OPERATION
12 REPORTING
5-2
Utility mode/Fax mode parameters
Description
Used to specify settings for the machine's
operating environment.
Used to specify the size and type of paper
loaded in the 1st paper drawer. In addition,
settings can be specified for the paper
drawers that are selected during the auto-
matic tray switching operation.
Used to register up to two custom paper
sizes.
Used to perform maintenance operations in
order to maintain the machine's efficiency.
Used by the administrator to specify set-
tings for managing the accounts and to
specify remote monitoring settings.
Used to specify the default settings for the
various copy functions.
Used to register destinations for one-touch
dial keys, speed dial numbers and group di-
aling.
Used to specify the default settings for the
various fax functions.
Used to specify the default settings for the
various transmission operations.
Used to specify the default settings for the
various reception operations.
Used to specify the default settings for the
various report operations.
Page reference
—
—
—
—
—
—
—
p. 5-17
p. 5-48
p. 5-59
p. 5-65
p. 5-80
Fax kit FK-506