3
4
Press the [+] or [,] key until "MAILBOX TX" is selected, and then press
the [OK] key.
5
Use the keypad to type in the fax number of the recipient, and then
press the [OK] key.
–
Refer to "Specifying a recipient" on page 2-12.
6
Use the keypad to type in the mailbox ID, and then press the [OK] key.
–
Enter the mailbox ID (SUB) (20 digits or less) registered for the re-
cipient's mailbox.
–
The only characters that can be used for the mailbox ID are 0
through 9, * and #.
–
If the recipient is specified using a one-touch dial key or a speed
dial number that is also programmed with a SUB (sub-address), the
SUB is displayed. If necessary, change the setting.
–
To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
3-8
Useful transmission and reception functions
Fax kit FK-506