Tone Control - Technics SX-KN2400 Operating Instructions Manual

14_Part IX.fm 156 ページ ２００３年１月２７日 月曜日 午後１時５２分
Part IX

Tone Control

Settings for the entire instrument's final output sound quality.
1.
On the REVERB & EFFECT display, select
TONE CONTROL.
• The display looks similar to the following.
∧
2.
Use the BASS and
low range and the TREBLE
for the high range.
• Raising the settings excessively may cause
distorted sounds. Lower the setting or the
MAIN VOLUME.
156
QQTG0692
∨
buttons to adjust the
∧ ∨
and buttons
Reverb & Effect