Outline Of The Sound - Technics SX-KN2400 Operating Instructions Manual

13_Part VIII.fm 146 ページ ２００３年３月６日 木曜日 午後１時３５分
Part VIII Sound

Outline of the Sound

The SOUND mode is used for making fine adjustments to the functions related to sound, such as tone,
and tuning.
1.
Press the PROGRAM MENUS button to turn it
on.
• The display looks similar to the following.
2.
Select SOUND.
• The display looks similar to the following.
3.
Select the desired menu.
Summary of the SOUND menu items
PART SETTING (page 147)
Set the various sound attributes for each
part.
MIXER (page 150)
Use the MIXER display to visually adjust
the major settings of each part.
MASTER TUNING (page 152)
Select the type of tuning for the instrument.
KEY SCALING (page 152)
Select the type of scaling (tuning).
SOUND LOAD OPTION (page 153)
Specify whether the various data accompa-
nying a sound, such as effects, are used
when the sound is recalled.
146
QQTG0692
PROGRAM
MENUS
4.
Follow the procedures on the corresponding
menu display.
• When the TEMPO/PROGRAM indicator is lit,
it indicates that the TEMPO/PROGRAM is
available for setting the current function.
5.
When you have finished setting the functions,
press the PROGRAM MENUS button to turn it
off.
A word about parts
The organization of the sound parts is as follows.
Normal parts:
RIGHT 1, RIGHT 2, LEFT, PART 1 to 16
• It is suggested that PART 10 be used for the
DRUMS part.
AUTO PLAY CHORD (automatic accompani-
ment) parts:
ACCOMP 1–5, BASS, DRUMS 1, 2, CHORD,
R.BASS.
PERFORMANCE PADS part:
PADS
TECHNI-CHORD
Select the TECHNI-CHORD harmony style.
(Refer to page 47.)
APC REVERB SETTING (page 154)
Adjust the degree of REVERB for each
automatic accompaniment part.
SOUND ARRANGER
Changes the sound of each automatic
accompaniment part. (Refer to page 59.)