Playing The Rhythm - Technics SX-KN2400 Operating Instructions Manual

07_Part II.fm 51 ページ ２００３年２月５日 水曜日 午後２時４０分
Part II

Playing the rhythm

Intro, fill-in and ending patterns fitting each different rhythm pattern are permanently recorded in your
Keyboard, thus allowing a versatile rhythm performance.
INTRO
Begin the rhythm performance with an intro pat-
tern.
1.
Press the INTRO & ENDING 1 or INTRO &
ENDING 2 button to turn it on.
INTRO & ENDING
2.
Press the START/STOP button to start the
rhythm.
START/STOP
1
• An intro pattern is played, after which the nor-
mal rhythm pattern begins.
COUNT INTRO
You can begin the rhythm performance with a
spoken one-measure count.
1.
Press the COUNT INTRO (FILL IN 2) button
to turn it on.
2.
Press the START/STOP button to start the
rhythm.
• A spoken one-measure count is played, after
which the normal rhythm pattern begins.
1 2
2 3 4 BEAT
FILL IN
2
COUNT
INTRO
Mode setting
You can select the mode for the count sound.
1.
Press the MODE button in the AUTO PLAY
CHORD section to turn it on.
AUTO PLAY CHORD
MODE OFF/ON
CHORD FINDER
• The display looks similar to the following.
2.
Use the COUNT INTRO button to select a
mode.
VOICE: A spoken count (initialized setting).
CLICK: A clicking sound for the count.
FILL IN
You can insert a fill-in pattern any time during the
rhythm performance. Choose from two different
fill-in patterns.
1.
Select a rhythm and press the START/STOP
button.
2.
Press the FILL IN 1 or FILL IN 2 button.
FILL IN
1
SEQUENCER COUNT
RESET INTRO
• A fill-in pattern is heard immediately for the
remainder of the measure.
• When a FILL IN button is pressed on the last
beat of the measure, the fill-in pattern con-
tinues to the end of the following measure.
Playing the rhythm
2
51
QQTG0692