Sound Load Option - Technics SX-KN2400 Operating Instructions Manual

13_Part VIII.fm 153 ページ ２００３年２月５日 水曜日 午後１時５１分
Part VIII
ORIGINAL tuning
Each instrument of each sound has its own origi-
nal tuning data. This setting affects the tuning
curve that spans the entire keyboard. So, for
example, the acoustic piano-type sounds dupli-
cate those of a real piano, in that the high notes
are tuned slightly higher and the low notes
slightly lower.
You can specify for each part whether this origi-
nal tuning is enabled or not.
1.
Use the PART SELECT
select a part.
2.
Use the ORIGINAL TUNING ON/OFF button
to select ON or OFF.

Sound Load Option

The data for each individual sound is set with the most suitable effect settings, etc., but in some cases
when switching from one sound to another and these settings are recalled, the setup is not the way you
want it. By using the SOUND LOAD OPTION, you can adjust the settings so that specific data is not
recalled.
1.
On the SOUND MENU display, select SOUND
LOAD OPTION.
• The display looks similar to the following.
Use the L and M buttons to select an item.
2.
∧ ∨
Use the and button to set the filter to ON
or OFF.
∧ ∨
and buttons to
Sound
153
QQTG0692