Initialize; Initial; Select Control - Technics SX-KN7000P Service Manual

This Keyboard has many settable functions and storable memories. However, you can return the settings
and memory to the factory-preset status.
1.
Press the PROGRAM MENUS button to turn
it on.
• The display changes to the following.
2.

Select CONTROL.

The display looks similar to the following.
3.
Select INITIAL.
This display changes to the following.
4.
Use the and buttons to select the desired
type of initialization.
• PERFORMANCE includes all the items which
are listed below it.
PROGRAM
MENUS
5.
Press the OK button.
The display changes to the confirmation dis-
play. Press the YES button if you wish to
execute the initialization. Press the NO button
if you wish to cancel the procedure.
Initialization begins. When initialization is
completed, "COMPLETED!" is shown on the
display and the Keyboard returns to the normal
performance mode.
The USER MIDI, FAVORITES, HOME PAGE
settings and CUSTOM styles are not initialized
by this procedure.
You can also reset all the PERFORMANCE
items with the following procedure:
Turn off the power to this instrument once.
Then, while pressing the three lower left but-
tons in the RHYTHM GROUP section (60's &
70's, MODERN DANCE and SOUL & R&B)
at the same time, turn the power on again.