Outline Of The Disk Drive Function; Part Vi Disk Drive (Kn) - Technics SX-KN2400 Operating Instructions Manual

11_Part VI.fm 117 ページ ２００３年２月５日 水曜日 午後２時４３分
Part VI Disk Drive (KN2400)

Outline of the Disk Drive function

The Disk Drive enables you to store recorded and stored data from this instrument's memories on disks,
as well as play commercial recorded disks on this instrument.
Internal memory and Disk Drive
The storable internal memory of this instrument
as well as the backup time are limited. However,
the Disk Drive maximizes your control of data
management by allowing you to store (SAVE)
this instrument's data on disks, and then to recall
(LOAD) it at any time.
• The BACK UP data will not be erased even
with the passage of time.
The following data can be saved/loaded:
PERFORMANCE
CURRENT PANEL (The current panel settings)
PANEL MEMORY*
SEQUENCER
COMPOSER* (MEMORY contents)
SOUND MEMORY*
PERFORMANCE PADS (USER memories)
EFFECT MEMORY*
BACKUP
MIDI & FAVORITES
• When creating or saving song data, it is rec-
ommended that you use the performance data
in the PERFORMANCE group.
Main parts of the Disk Drive
Disk slot
Eject button
Floppy Disk Drive
SAVE LOAD
Floppy disk
• Instead of using MIDI & FAVORITES as fre-
quently loaded and saved data, it is recom-
mended that you save it with other data as
Keyboard backup data.
∗
• A mark indicates that data can be loaded to
and from a specific memory (SINGLE LOAD).
• The SEQUENCER contents can be saved in
one-song increments (SEQUENCER SONG
SAVE).
• Please use 2HD disks to load/save BACKUP
data.
Eject button
Press to remove the disk from the Disk Drive.
• You can use 3.5 inch 2DD (720 KB) or 2HD
(1.44 MB) disks; however, 2HD disks format-
ted as 2DD cannot be used.
117
QQTG0692