Apc Reverb Setting - Technics SX-KN2400 Operating Instructions Manual

13_Part VIII.fm 154 ページ ２００３年２月５日 水曜日 午後１時５１分
Part VIII

APC Reverb Setting

Although an appropriate REVERB is applied for the automatic accompaniment parts depending on the
rhythms by default, you can adjust the REVERB level for each part.
1.
On the SOUND MENU display, select APC
REVERB SETTING.
• The display looks similar to the following.
Use the PART L and M buttons to select the
2.
∧
part, the DEPTH
value (PRESET IN RHYTHM, 0 – 127).
• PRESET IN RHYTHM is an optimal preset
value for each rhythm for use with the APC
Reverb Setting.
154
QQTG0692
∨
and buttons to set the
Sound