Removing The Push Handles; Inserting The Push Handles - Meyra Polaro II 1.745 Operating Manual

Removing the push handles

Loosen the clamping screw with the
clamping lever (1) and pull the ac-
cording push handle up as far as it
will go.
Press the respective spring button (2)
inward and pull the push handle out
of the clamping device (3).

Inserting the push handles

Press down the spring button (2) and
insert the push handle from the top
into the respective clamping device
(3).
Push the push handle through the
clamping device (3) and retighten the
clamping screws with the clamping le-
ver in the desired position (1).
40
3
1
2