SUPPORT WHEELS
The support wheels serve to increase
the tilting stability and are inserted
from the rear into the lower frame
tube.
Attention:
Anti-tip castors do not provide suf-
!
fi cient protection against tipping
over in certain situations.
Therefore, do not:
▲
Leaning the upper body far back.
▲
Jerky acceleration, especially when
driving uphill.
☞
Note:
Observe the safety information <
Mechanical wheelchairs >!
Adjusting the support castor
Press the spring button to adjust the
support castor (1), the reposition the
support castor accordingly until the
spring button automatically locks into
the next position.
☞
Note:
The spring button must engage vis-
ibly and audibly. – Check the func-
tion!
Correct support castors length
The support castors must reach further
out than the drive wheels in order to
achieve a suffi cient support function.
Attention:
For suffi cient tilting stability both
!
support castors are to be posi-
tioned evenly.
44
2
•
Have the function checked by the
specialist dealer after each change
to the seat height and wheel size!
☞
Note:
Therefore observe the safety in-
structions < Mechanical wheel-
chairs > chapter < Inclinations,
overcoming obstacles > as well as <
Driving on elevators, lifts and esca-
lators >!
1