Table of Contents
Advertisement
PUSH HANDLES
The height adjustable push handles
(1) are attached to the back support
with a clamping jig each (2) and can
be adjusted to the requirements of
the attendant.
The push handles are sleeplessly
height adjustable by about 30 cm and
secured against being pulled out.
☞
Note:
Further varieties of push handles
are optionally available at you spe-
cialist dealer.
Height adjustment
Loosen the clamping screw with the
clamping levers (3) so far that the re-
spective push handle can be adjusted
into the desired position.
Lift the push handle to the desired
height.
Retighten the clamping screw with
the clamping levers (3).
Special features of the clamping
lever
The clamping lever (3) can be turned
into an operation position that is com-
fortable for you.
For this pull the lever outward (direc-
tion of the arrow), until the teething
is released.
After turning the lever let the teeth-
ing engage again.
1
2
3
39
Advertisement
Table of Contents
