Attaching The Leg Supports; Height Adjustment Of The Leg Support - Meyra Polaro II 1.745 Operating Manual

Multifunction wheelchair
Table of Contents

Advertisement

Attention:
Swivelled-away leg stump supports
!
are automatically unlocked and
can easily fall off. Note this when
handling (e.g. transport).
When swivelling them back make
sure that the leg support audibly
locks into place.
Note:
After swivelling the leg support in-
ward again do not forget to check
the corresponding locking device.
Afterwards swivel the calf plates
inward again.

Attaching the leg supports

Place the leg support, swivelled off
sideways, from the top onto the re-
ceptacle pins (1) and swivel forward
until the lock audibly engages.
Check the locking device!
Height adjustment of the leg sup-
port
Attention:
Never put the free hand into the
!
adjustment mechanism while ad-
justing the height adjustable leg
support. – Danger of crushing!
Operate parking brakes. – This
prevents accidental rolling of the
wheelchair (see section < Parking
brakes >).
26
– While seated have the leg support
secured against falling down by an
attendant or aid.
– Loosen the clamping lever (2) and
adjust the legrest to the desired
height.
– After the adjustment retighten the
clamping lever (2).
1
2

Advertisement

Table of Contents
loading

Table of Contents