Height adjustment of the foot-
plates
The leg supports can be adjusted via a
telescopic tube.
Operate parking brakes. – This pre-
vents the wheelchair from rolling
1
away accidentally.
Slacken the clamping screw (1).
Extend the lower part of the leg sup-
port with footrest to the desired
length.
Tighten the clamping screw (1).
Angle adjustable footplates
After loosening the clamping screw
(2) pull out the dovetail connection
and adjust the angle of the footplates.
2
3
Retighten clamping screw.
The setting screw (3) serves to hori-
zontally correct the angle of the foot-
plates.
24