Supplementary User/Safety Information - Meyra Polaro II 1.745 Operating Manual

Multifunction wheelchair
Table of Contents

Advertisement

Supplementary user/safety
information
Clean, passive lighting is required
for driving in public traffi c.
Do not throw or drop parts belong-
ing to the wheelchair! – Removable
parts such as arm supports and leg
supports should be handled cor-
rectly to ensure lasting perform-
ance. To guarantee their function.
Removable parts, e.g. arm supports
and leg supports, must be checked
for correct locking before the start
of each drive. Drive wheels with
defective linchpin (quick-fi t) axles
can detach from the wheelchair
during the drive.
By adding on or removing acces-
sories/components the dimensions
and weight of the wheelchair
change which can affect the driv-
ing behaviour.
Tyres are made of a rubber mix-
ture and can leave permanent or
diffi cult-to-remove marks on some
surfaces (e.g. plastic, wooden or
parquet fl ooring, carpets, mats).
To prevent damages due to cor-
rosion do not use ore store the
wheelchair in damp rooms.
10
Never leave children/adolescents in
wheelchairs unsupervised
Always approach small obstacles,
e.g. steps or curbs, slowly and at a
right angle (90°) until the steering
wheels almost touch the obstacle.
Briefl y stop the wheelchair and
then drive over the obstacle.
Keep well clear of rail grooves, rails
and gully covers or similar sources
of danger. If not possible, cross such
obstacles at a right-angle (90°).
Maintain a suffi cient safety dis-
tance between the wheelchair and
drops, steps and obstacles. This
distance must allow enough time
to react and enough distance to
brake/turn.
Always reduce the speed before a
curve. A sharper curve requires a
lower speed. Never lean outwards
in a curve.

Advertisement

Table of Contents
loading

Table of Contents