Toner Replenisher; Toner Replenisher Function - Minolta CSPRO EP1031 Manual

22

1. Toner Replenisher

Toner Replenisher Function

When many copies are made of an original that has a large amount of black area (such as a photograph),
the copier can rapidly exhaust the supply of toner available. As a result, the image density of the copies
will become lighter. In such a case, use the Toner Replenisher function to regain the normal image
density quickly.
Check that the copier is in the initial mode.
1
Turn the Main Switch off. While pressing
2
the Clear/Stop Key, turn the Main Switch on.
After the copier is warmed up, the toner
begins to be supplied.
Original
C1159O012EA
C1159O044DA
Copy
While the Toner is being replenished, the
3
LEDs at the bottom of the Display Panel
will light up one at a time in the clockwise
direction.
Press the Clear/Stop Key to stop the Toner
4
Replenishing mode.
NOTE
Copying cannot be performed while the Toner is
being replenished. If copying must be
performed, stop the Toner Replenishing mode
with the Clear/Stop Key and then start copying.
The copier cannot enter the Toner Replenisher
mode under the following conditions: the
starter is being refilled, and the indicators show
that an error or paper misfeeds has occurred.
C1159O042DA
C1159O045DA
C1159O046DA