Cover - Minolta EP3050 Operator's Manual

Cover

The Cover mode lets you make a front cover or a front and back cover for a copy set by copying
the first page or the first and last page of an original set on different paper from the normal copy
paper, such as colored paper, or by inserting that special paper before and after the original set.
There are four different Cover functions available. Select the appropriate one according to your
need.
NOTE
The copier must be equipped with the Automatic/Duplexing Document Feeder AF-3/AFR-9.
Functions
Cover (Front) <Copied Cover>
Original Set
Cover (Front) <Non-Copied Cover>
Copy Set
Original Set
Cover (Front&Back) <Copied Cover>
Original Set
Cover (Front&Back) <Non-Copied Cover>
Copy Set
Original Set
Copy Set
Cover
1136O130AA
Separate
Front Cover
1136O131AA
Copy Set
Front Cover
Back Cover
1136O130AA
Separate
Front Cover
Separate
Back Cover
1136O132AA
10. Auxiliary Functions
The first page of the original set is copied
onto a different type of paper (e.g., colored
paper). p. 82
A sheet of a different type of paper (e.g.,
colored paper) is inserted as a cover before
the copy set. p. 82
The cover sheet does not undergo a copy
process.
The first and last pages of the original set
are copied onto a different type of paper
(e.g., colored paper).
A sheet of a different type of paper (e.g.,
colored paper) is inserted as a cover before
and after the copy set.
The cover sheets do not undergo a copy
process.
81
p. 82
p. 82