When This Type Of Copy Is Produced; The Image Is Too Light; The Image Is Too Dark; The Copy Is Blurry - Minolta EP3050 Operator's Manual

162

1. When This Type of Copy is Produced

Symptom

The Image is too light.

The Image is too dark.

The Copy is blurry.

Possible Cause
The exposure level for the Auto
Exposure Mode is set at one of the
"Light" levels.
The manual exposure level is set
on the lighter side.
1074O108
You have been making copies from
a photo or an original with a large
dark area.
The Toner Bottle has just been
replaced.
The message "Replenish toner" or
"Please add toner" is shown on the
Touch Panel.
The paper is damp.
The exposure level for the Auto
Exposure Mode is set at one of the
"Dark" levels.
The manual exposure level is set
on the darker side.
1074O109
The entire surface of the Original
Glass is dirty.
The original is not held tightly
against the Original Glass.
The paper is damp.
1074O110
Action
Change the setting of the User's
Choice (Exposure Priority).
p. 122
Cancel the Auto Exposure Mode
and select the Manual Exposure
Mode to adjust the exposure level
to obtain a darker image.
p . 47
Touch the Key as
DARKER
necessary to obtain a darker image.
p. 47
The copier needs more toner.
Replenish toner by using the Toner
Replenisher Function in the User
Mode. p. 119
The copier needs more toner.
Replenish toner by using the Toner
Replenisher Function in the User
Mode. p. 119
Replace the Toner Bottle with a
new one. p. 136
Replace the paper. p. 130
Change the setting of the User's
Choice (Exposure Priority).
p. 122
Cancel the Auto Exposure Mode
and select the Manual Exposure
Mode to adjust the exposure level
to obtain a lighter image.
p. 47
Touch the Key as
LIGHTER
necessary to obtain a lighter image.
p. 47
Wipe the Original Glass clean with
a soft dry cloth. p. 183
Place the original in position so
that it is held tightly against the
Original Glass. p. 34
Replace the paper. p. 130