Selecting Color Mode - Minolta CF5001 User Manual

Selecting Color Mode

The following four color modes are available:
AUTO mode detects whether the scanned original is colored or black-and-white image,
and automatically selects either FULL COLOR mode or BLACK mode for copying.
FULL COLOR mode makes full-colored copies whether the original image is colored or
not.
BLACK mode makes black-and-white copies whether the original image is colored or not.
SINGLE COLOR mode copies in one color to be selected from red, green, blue, magenta,
cyan, or yellow.
The FULL COLOR mode is initially selected. Follow the procedure below to change the
Color mode.
Specification for Color Mode
❒ A color mode is incompatible with another color mode.
❒ Incompatible with AUTO: Tab paper, Folding/Stapling&Folding/Trimming(with Booklet
selected), Combination, Booklet, Overlay, Overlay Memory
❒ Incompatible with FULL COLOR: Tab Paper
❒ Incompatible with SINGLE COLOR: Tab Paper
1.
Touch a mode key under the COLOR MODE on the Basic Screen to
select the desired Color mode.
3-2
The color adjustment function is provided on this machine. See Section 7:
Color Adjustment.
Some adjustments cannot be made in the BLACK mode and SINGLE COLOR
mode.
Incompatible with BLACK: Hue/Saturation/Brightness in Color Adjust, Color
Balance, Any function except Auto in Screen, Color/Text of Image Judge in
Others, Original Type in Special Original
Incompatible with SINGLE COLOR: Hue/Saturation/Brightness in Color Adjust,
Color Balance, Color/Text of Image Judge in Others, Original Type in Special
Original
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].