Sending A Broadcast Fax - Konica Minolta 9880 User Manual

Sending a Broadcast Fax

1 Load the document.
2 Enter the programmed location. Use a One-Touch key, 2-
or 3– Digit Speed Dial, Group Directory, or enter a
number on the numeric keypad.
3 Press Enter.
4 Repeat Steps 2 and 3 until all locations for the broadcast
are input.
For more information, refer to the Notes, below.
To delete a location from the broadcast, refer to the
following section, "Deleting a Location from a
Broadcast Fax."
5 At this point, you have three options.
Press Enter to display the locations for the broadcast.
Press Enter twice to print the locations for the broadcast.
Press Start to begin faxing.
!
Notes
If Auto Start is set to ON (default setting) you will have
2 seconds between steps 2 and 3 (if using a Speed Dial
and only after the first entry) to input the next location
before machine begins dialing. To change this, set Auto
Start (User Function #42) to OFF.
|
User's Reference Guide 125