Entering A Pbx Dial Prefix; Clearing The Pbx Dial Prefix - Konica Minolta 9880 User Manual

Entering a PBX Dial Prefix

1 Press Menu/Exit to enter Menu.
2 Input speed access no. 50 (PBX Line). Wait.
3 Press or to select ON or OFF setting. Press Enter.
4 Press or until you reach Dial Prefix. Press Enter*.
5 Input the digit(s) normally dialed to obtain an outside line
from the PBX. Press Enter.
6 Press Menu/Exit to return to standby mode.
* Dial Prefix can also be accessed from the main menu by
entering its speed access code 52.
!
Remember that all outside telephone numbers
programmed into the machine must begin with the dial
prefix of the PBX.
|
78 KONICA FAX 9880/9980

Clearing the PBX Dial Prefix

1 Press Menu/Exit to enter Menu.
2 Input speed access no. 50 (PBX Line). Wait.
3 Press or to select OFF setting. Press Enter.
4 Press Menu/Exit to return to standby mode.