Konica Minolta 9880 User Manual page 36

Plus Key (One-Touch key #39)
For all feature set configurations: This key is used for chain
dialing. Each fax number entered or programmed into the
machine can be up to 40 digits long.
If you need to dial a number longer than 40 digits, you can
dial the number using any combination of Speed Dial
numbers or the numeric keypad.
To enter a chain dial number into a Speed Dial number, press
the Plus key at the 40th position of the first part of the
number to indicate it is a chain dial number, then complete
the process by entering the second part of the number
following the procedures required for inputting another
Speed Dial number.
If the Internet Fax feature set is installed: Use this key to
enter the "-" character when programming ID and PBX,
public line, international telephone, or Earthing/Flashing
switches. This key is also used to enter the "+" character in
TSI/CSI numbers.
|
36 KONICA FAX 9880/9980
Pause Key (One-Touch key #40)
Use this key to enter automatic 3-second pauses in dialing
when programming telephone numbers. For example, use
this key to tell the machine to wait for an outside or
international line to open. Pauses in a telephone number
dialing sequence are indicated by a "P".
Other
Special character keys (, ; @ _ : / \ . +).