3Com 4510G Configuration Manual page 581

Figure 1-9 Configure AAA for SSH users by a RADIUS server
Vlan-int2
192.168.1.70/24
SSH user
Configuration procedure
1) Configure the RADIUS server. (iMC)
This example assumes that the RADIUS server runs iMC PLAT 3.20-R2602 or iMC UAM 3.60-E6102.
# Add an access device.
Log into the iMC management platform, select the Service tab, and select Access Service > Access
Device from the navigation tree to enter the Access Device page. Then, click Add to enter the Add
Access Device window and perform the following configurations:
Set both the shared keys for authentication and accounting packets to expert
Specify the ports for authentication and accounting as 1812 and 1813 respectively
Select Device Management Service as the service type
Select 3Com as the access device type
Select the access device from the device list or manually add the device with the IP address of
10.1.1.2
Click OK to finish the operation
RADIUS server
10.1.1.1/24
Switch
1-39
Internet